How to Build a Costas Receiver?

  • Thread starter Thread starter sohagiut
  • Start date Start date
  • Tags Tags
    Receiver
AI Thread Summary
To build a Costas receiver, one must focus on the interaction between the local oscillator (LO) and radio frequency (RF) signals at the mixer, which generates an intermediate frequency (IF) signal defined by the difference between LO and RF. The goal is to effectively track this IF signal to determine the RF position using in-phase (I) and quadrature (Q) components. Suggestions for components can be found on websites like minicircuits.com. Understanding the relationship between the signals and their processing is crucial for successful implementation. The discussion emphasizes the importance of these technical aspects in constructing a functional Costas receiver.
sohagiut
Messages
7
Reaction score
0
Hello,
is anyone can guide me to built a costas receiver. At the input of a mixer the LO and RF signal creates an IF signal. This IF is the frequency difference of LO and RF irrespective of their position of frequency spectrum, i mean IF=LO-RF or IF=RF-LO. I need to track this IF signal at the output of the mixer. I want to use this costas receiver to track the position of the RF using the I (inphase) and Q (Quadrature) component.

any idea! thanks in advance

Regards
Reza
 
Engineering news on Phys.org
Thread 'Weird near-field phenomenon I get in my EM simulation'

Thread 'Weird near-field phenomenon I get in my EM simulation'

I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
View full post »

Thread 'EMF (Electromagnetic Field) & EHS (Electromagnetic Hyper Sensitivity)'

Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...
View full post »

Similar threads

Dividing the output of a VCO or....
Replies
8
Views
2K
What is the Design Process for Building an RF Mixer Circuit?
Replies
25
Views
6K
How Does a Wifi Receiver Implement RF Systems Without Traditional Components?
Replies
7
Views
3K
How to measure phase difference of 2 signals using IQ demodulator
Replies
1
Views
11K
How does AM broadcasting/receiving work + a project for HS students?
Replies
20
Views
1K
Using an inductor choke as a receiving antenna for LW radio
Replies
14
Views
2K
Trouble with getting AM receiver to work
Replies
29
Views
4K
Opamp for MF/RF ranges (1.0-1.2MHz)
Replies
15
Views
4K
Current flow in an MRI receive coil
Replies
5
Views
2K
Building a device for RF transmission/detection
Replies
4
Views
2K

Hot Threads

Recent Insights

Back
Top