How to Create a 90-Degree Turning Infield Carrier for Motorcycles

  • Thread starter Thread starter roronoazorro
  • Start date Start date
  • Tags Tags
    Carrier Design
AI Thread Summary
The discussion focuses on creating a 90-degree turning mechanism for an infield carrier attached to a motorcycle, designed to tip off using gravity without requiring the user to dismount. The project involves connecting two cylinder shafts, with a load capacity of around 300 kg filled with palm oil. Suggestions include using a Hooke coupling and offset drive to allow the connection to follow the carrier's movement and achieve the desired twisting motion. Participants seek clarification on the specific application and mechanics involved in the design. The goal is to ensure the connection functions effectively within the constraints of the project.
roronoazorro
Messages
3
Reaction score
0
how to joint two cylinder shaft which can make it turn 90degree

anyone can give their opinion for me? :D
 
Engineering news on Phys.org


Can you give more information of what you're trying to do? What is the application? Is it twisting 90 degrees or bending 90 degrees or something else altogether?
 


the project is infield carrier.. this carrier connect to motorcyle..this carrier need to tip off by using gravity that make the user don't need to down from motorcycle. this connection play a role to make it success.. sorry my english not so good..
 
the project is infield carrier.. this carrier connect to motorcyle..this carrier need to tip off by using gravity that make the user don't need to down from motorcycle. this connection play a role to make it success.. this carrier is fill with palm oil. the load inside carrier around 300kg. sorry my english not so good.. so i thought i want to join this conection by using hooke coupling and offset drive.. its better?? because i want to make this conection can follow the rhythm of carrier and can twist around 90degree.. anyone can give suggestion??
 
Last edited by a moderator:

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »

Similar threads

Help Me Design a Motorcycle Airbox for Charity Racing Series
Replies
3
Views
2K
Mechanisms for multiaxis vibration
Replies
0
Views
692
Turning Moment of Single Cylinder 4-Stroke Engine | Explanation
Replies
2
Views
3K
Resources for designing a planetary gearbox
Replies
3
Views
1K
Calculating the Torque that a fan would exert on a Hex shaft
Replies
6
Views
4K
Frequency Shift Key Modulation: how are the carrier frequencies chosen
Replies
5
Views
2K
How to predict the exit temperature of an air compressor?
Replies
33
Views
3K
How Do You Properly Attach Magnets and Bearings in a BLDC Motor Rotor Design?
Replies
1
Views
2K
Translating reciprocating motion into a 45 degree rotation
Replies
5
Views
2K
Torque calculations: Rotating vertical shaft
Replies
5
Views
5K

Hot Threads

Recent Insights

Back
Top