How to design a car model workin on chem. energy?

AI Thread Summary
To design a car model that operates on chemical energy, it's essential to clarify the type of chemical energy being utilized, such as combustion or battery power. Proper communication and specific questions are crucial for receiving effective assistance in project discussions. All vehicles fundamentally rely on chemical energy, which can be harnessed in various ways. Engaging with the community in a clear and structured manner will facilitate better guidance and support. Understanding these foundational concepts is key to progressing in the project.
mnz_zope
Messages
1
Reaction score
0
please help guyz its a project...
 
Engineering news on Phys.org
Welcome to PF, mnz zope.
Please use proper English in these forums. Trying to read that 'kid stuff' is very irritating.
You must post more specific questions in order to get assistance. To start with, all cars run on chemical energy of some sort, be it combustion or battery power.
 
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'
Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...
Back
Top