How to find the magnitude of the acceleration given F, kF, m

AI Thread Summary
To find the magnitude of the acceleration of a block on a 30-degree incline with an applied force of 50 N, mass of 4.41 kg, and a coefficient of kinetic friction of 0.4, it's essential to analyze the forces acting on the block. The net force should be calculated by considering the components of the applied force and the frictional force, which increases the normal force. A free body diagram is crucial for visualizing the forces in both the x (along the slope) and y (perpendicular to the slope) directions. The correct approach involves summing the forces in each direction and then solving the resulting equations for acceleration. Understanding the balance of forces is key to accurately determining the block's acceleration.
Nairb
Messages
2
Reaction score
0
<Moved from a technical forum and therefore no template.>

A block is pushed up a 30 incline by an applied force as shown. If F = 50 N and m = 4.41 kg and the coefficient of kinetic friction is 0.4. What is the magnitude of the resulting acceleration on the block?

This is what I did but it's wrong
Fnet= Fa-Fs
m*a= 50-0.2*4.41*9.8*cos(30 and then divide the whole thing by 4.41.
but the answer is wrong. What did I do wrong?
 
Last edited:
Physics news on Phys.org
Welcome to Physics Forums.
I apologize, but I am having a difficult time understanding what you did. I will try to explain a couple of things. The force F = 48.5 is not acting in the direction of the acceleration. Only a component of it is. Also, the F = 48.5 N force also has the effect of increasing the normal force because a component of force F is acting perpendicular (edit: downward) to the plane of the surface.

Did you draw a free body diagram? For these types of problems, it is extremely helpful to draw a free body diagram. For this problem, I would assign the x-axis along the slope of the plane, and the y-axis perpendicular to that. That way, your acceleration will be entirely along the x axis.

Once you have your free body diagram, you will need to sum forces in the x direction and sum forces in the y direction. Then you can solve those 2 equations for the acceleration.
 
  • Like
Likes sophiecentaur
@Nairb, Is there an image to accompany the problem? It hard to check what's been tried without having a clear understanding of the actual scenario.
 
gneill said:
Is there an image to accompany the problem?
Hmmm. There was an image originally. It seems that when the values were edited, the image disappeared. The force F was acting horizontally on the block that was sitting on a 30° incline.
 
  • Like
Likes gneill
Sorry, the image was deleted by accident. Here it is:
img_secV3_q3.PNG

what I did was this: F - (uk*m*g*cos30) divided by the mass
 
Nairb said:
F - (uk*m*g*cos30)
You need to analyse the balance of forces on the block more carefully.
What forces have components in the direction normal to the slope? What equation does that give?
Likewise for parallel to the slope.
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

How do you find the magnitude of acceleration?
Replies
24
Views
4K
Distribution of Energy when work is done on a system of 2 masses connected by a spring
Replies
17
Views
2K
Magnitude of Acceleration on Merry-Go-Round
Replies
2
Views
2K
Acceleration of a box across a rough horizontal plane
Replies
1
Views
2K
Tension force and acceleration Problem
Replies
1
Views
2K
Friction on Aluminum & Copper Blocks: Find Sum of Magnitudes
Replies
4
Views
2K
Acceleration of a block on a massive pulley
Replies
1
Views
2K
Magnitude of acceleration of boxes -- is this method correct?
Replies
7
Views
3K
Acceleration on an inclined plane
Replies
3
Views
2K
What is the magnitude of acceleration?
Replies
13
Views
3K

Hot Threads

Recent Insights

Back
Top