How to Graph a Sine Wave in PSpice for a Specific Time Interval?

Thread starter EEKid
Start date Oct 7, 2007
Tags

Pspice

AI Thread Summary

To graph a sine wave in PSpice, use the sine wave sources available in the sources library and define the parameters accordingly. The specific waveform can be represented as v = 3*sin(5*t) V within the time interval of 0<t<0.05s. There is a suggestion to clarify the purpose of the graph, as it may relate to a larger circuit design. Understanding the context can enhance the utility of the sine wave graphing process. This method effectively allows for accurate waveform visualization in simulations.

Oct 7, 2007

EEKid

Hey guys

Just wanted to know how to graph waveforms in PSpice

Like graph v= 3*sin(5*t) V, in interval 0<t<.05s

Please help, need to know quick

thanks

Engineering news on Phys.org

Oct 8, 2007

higha level

Pspice has sine wave sources that you can use under the sources library. Just define your parameters. Why would you just want to graph that though? Is it part of a bigger circuit?

Thread '3-terminal device external modeling'

Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...

View full post »

Thread 'When 50,000 volts go through a wire at 5,000,000 FPS - The Slow Mo Guy'

View full post »

Thread 'Two capacitors, etc.'

suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...

View full post »