Solving Power Equation & Compressing a Spring

  • Thread starter Thread starter ACLerok
  • Start date Start date
  • Tags Tags
    Power Spring
AI Thread Summary
The discussion centers on calculating power from the work equation W=F*v*t*cos(theta) and the relationship between work and spring compression. To find power, the derivative of work with respect to time is suggested, but clarification on how to perform this step is needed. Additionally, the work done to compress a spring a distance x_2 is related to the work done to stretch it a distance x_1, using the formula W=(1/2)kx^2. The relationship indicates that the work done in compressing or stretching a spring is proportional to the square of the distance. Understanding the definition of power and the work formula for springs is essential for solving these problems effectively.
ACLerok
Messages
194
Reaction score
0
I'm having trouble with one problem. The question aske me to finf the amount of power from the equation I found for work. Here is the equation for work: W=F*v*t*cos(theta) I am supposed to come up with an equation that will tell me how much power this is using the variables in the equation. A friend told me to take the derivative but I'm nto sure how to. How do i go about this?

Oh and this as well:
To stretch a spring a distance x_1 from its unstretched length, an amount of work of W must be done.

How much work must be done to compress this spring a distance x_2 from its unstretched length?
 
Physics news on Phys.org
power is work/time
that should be a pretty good hint
 
Knowing the definition of "power" would be extremely useful in doing any problem about power! Are you sure that you do?

Oh and this as well:
To stretch a spring a distance x_1 from its unstretched length, an amount of work of W must be done.

How much work must be done to compress this spring a distance x_2 from its unstretched length?

You need to know either:
that the formula for work done in either compressing or stretching a spring a distance x is (1/2)kx2 where k is the spring constant and x is the distance stretched or compressed or
(what follows immediately from that formula)
that the work done in compressing or stretching a spring a distance x is proportional to x2.

IF W is the work done stretching the spring a distance x_1 and W_2 is the work done in compressing it a distance x_2, then
W/(x_1)2= W_2/(x_2)2(= (1/2)k) so that

W_2= (x_2/x_1)2 W_1
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top