Hydrolic calculations of fountain

Thread starter BANKAR
Start date Nov 14, 2016
Tags

Calculations

Nov 14, 2016

BANKAR

Sir,

Guide me about calculation of hydrolics of fountain which is having throw of 60 feet and 90 feet with delivery pipe size of 50 mm.

Regards

Bankar

Engineering news on Phys.org

Nov 14, 2016

Mech_Engineer

Science Advisor

Gold Member

Have you considered doing a simple Internet search?

http://www.saferain.com/en/blog/hydraulic-calculations-for-architectural-fountains.html

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...

View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly

View full post »

Thread 'What's the most likely cause for this carbon seal crack?'

We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...

View full post »