I dont know if I did the problem right check please.

  • Thread starter Thread starter yaho8888
  • Start date Start date
AI Thread Summary
The problem involves calculating the height from which a jet must start a quarter turn to avoid exceeding a maximum acceleration of 4G while diving at 1200 km/hr. The equation used is A = V^2/r, leading to the conclusion that h, the radius of the circular motion, can be derived from the acceleration. The initial calculation yielded a height of approximately 2.834 km, but there were concerns about unit conversions, particularly with acceleration and speed. Corrections were made regarding the conversion of 4G and the need to ensure all units were consistent. The final consensus confirms that the calculations are correct, provided the units are properly managed.
yaho8888
Messages
62
Reaction score
0
[SOLVED] I don't know if I did the problem right check please.

Homework Statement


A jet is diving vertically downward at 1200km/hr
the pilot can withstand a maximum acceleration of 4G, before losing consciousness, at what height must the plane start a quarter turn to pull out of the dive? Assume the speed constant.


Homework Equations



A=V^2/r

The Attempt at a Solution



for this circular motion we know that h = radius of the circle
so
4G=(1200km/hr)^2/h
4G=4*9.8m/s=39.2m/s=508032km/hr^2(Not sure if convert it right)
508032=1200^2/h
h=2.834Km
Is this right, the answer has to be in Km so I convert the 4G.
 
Physics news on Phys.org
If you want the ans in km/hr, convert everything to those units.

4g = v^2/h =>
4*(9.8/1000)/(1/3600)^2 = 1200^2/h. The value of h will be in kms.

EDIT: 1/3600 corrected (1/3600)^2, after being pointed out by yaho8888.
 
Last edited:
Looks good; you incorrectly typed m/s instead of m/s^2 in your 4G calculation, but the math came out OK.
 
Shooting star said:
If you want the ans in km/hr, convert everything to those units.

4g = v^2/h =>
4*(9.8/1000)/(1/3600) = 1200^2/h. The value of h will be in kms.

wouldn't that be 4*(9.8/1000)/(1/3600)^2
 
yaho8888 said:
wouldn't that be 4*(9.8/1000)/(1/3600)^2

Yes. Thanks for pointing out the typo. I'll edit the post.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top