I with spectrophotometry ( The Beer-Lambert Law )

  • Thread starter Thread starter BBoy.Goon
  • Start date Start date
  • Tags Tags
    Law
AI Thread Summary
The discussion revolves around the mathematical derivation of the equation %T = e^(-εbc) from the Beer-Lambert Law and related equations. The initial equations provided are A = 2 - log10(%T) and A = εbc, where A is absorbance, %T is transmittance, ε is molar absorptivity, b is the path length, and c is the concentration. The first participant outlines a step-by-step approach to equate the two equations, leading to the expression for transmittance T. However, there is confusion regarding the interpretation of the constant e, with one participant suggesting it refers to Neper's number (approximately 2.72) and applying logarithmic transformations. The discussion highlights the complexities involved in manipulating these equations and the importance of clarity in mathematical notation and definitions.
BBoy.Goon
Messages
2
Reaction score
0
I'm doing a science project about the antioxidant activity of red wines from my country. This days, I was going through the theoretical part ( the basics of spectrophotometry, photometric analysis ect. ) and I'm currently at the Beer-Lambert Law. I'm would like to know the whole mathematical path that is used so that starting from this two equations: A = 2 - log10 %T and A = \epsilonbc,

where:
A is absorbance, ( no units )
T is transmittance, ( no units )
\epsilon is molar absorbtivity, ( L mol-1cm-1 )
b is the length of the sample ( path length of the cuvette ) ( cm ) and
c is the concentration of the compound in solution ( mol L-1 )

the equation %T = e -\epsilonbc is deduced.

note: the molar absorbtivity is represented by the letter epsilon from the Greek alphabet and it's not superscripted as it looks like.

Thanks in advance
 
Chemistry news on Phys.org
Well, let's see...

Start by putting the two equations equal to each other...

2-log_{10}(T)=\epsilon b c

Add log_10(t) to both sides...

2=\epsilon b c + log_{10}(T)

Subtract epsilon b c from both sides...

2- \epsilon b c = log_{10}(T)

And raise both sides to the power of 10.

T=10^2 * 10^{-\epsilon b c}

I got a different answer than that... I'm not sure if that's right.
 
I started just like you ( putting the two equations equal to each other ) but I think that e, from the equation %T = e-\epsilonbc stands for the so called Neper's number ( e = 2,72 ) and after using the rule that:

logab = logcb / logca

and several trasnformations I got stuck here:

loge%T = 2loge10 - \epsilonbc loge10
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top