Ideas for SR-71 Blackbird Review Paper

AI Thread Summary
The discussion revolves around selecting a topic for a review paper on the SR-71 Blackbird for a Gas Dynamics course. The original poster, with a background in Welding and Automation, seeks accessible topics related to the SR-71 that have sufficient recent literature. Suggestions include exploring the aircraft's variable inlet design, which significantly impacts performance, and the complexities of space shuttle re-entry, particularly regarding heat transfer and material design. The conversation highlights the challenge of finding recent articles on the SR-71, as most literature focuses on its retirement. Ultimately, the discussion emphasizes the need for a topic that balances accessibility and available research.
piano_girl
Messages
9
Reaction score
0
Hello all! I have to write a review paper of several current articles for my Gas Dynamics course. My research is in Welding and Automation, so I have very little experience in the area of aerodynamics. However, I have recently read a book on Lockheed Skunk Works and think that I would like to find a topic that deals with or has an application to the SR-71 Blackbird. I just wanted input on topic selection, since you all seem to be very knowledgeable. I want something that I can find at least four recent articles on and that is accessible to someone with an engineering background but only an introductory knowledge of aerodynamics. I was tentatively considering sonic boom propogation.

Thanks for any thoughts!
 
Engineering news on Phys.org
You want to find recent articles dealing with the aerodynamics of the SR-71? Not very likely. The only articles you're likely to find now are on it's retirement. If recent is not a real concern, the first topic as far as gas dynamics comes to mind is the variable inlet design. The inlet spikes were a pretty fascinating design aspect that had a lot to do with the aircraft's performance at those high speeds. They actually provided a lot of the thrust for the aircraft at high speeds.
 
I use the term "recent" pretty loosely (70s onward, I suppose). I like the idea about the inlet spikes. We just got done covering RAMjets and flow with heat addition, so I think it might be doable for me.
I was also thinking about space shuttle re-entry, but I know that with hypersonic flight there is dissociation and variant specific heats, which makes it a significantly more complicated flow problem. Would it be possible for me to find several articles on the design of the space shuttle tiles (finite element models of heating, etc.)? I was hoping there would be several nice articles on this, since it came to the forefront during the Columbia disaster.
 
i didn't quite understand what you want, but I'm a Mechanical engineer and most of us know aerodynamics and heat transfer whether finite or not. i mean applications OF the SR-71? like spying?or research? then u move to sonic booms, which is all about physics and calculations, but are mostly simple and easy to do. as for the aerodynamics of the SR-71? what's the question about it!
 
Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
Back
Top