Inertial Reference Frames in Train Experiments: Correct Statements

  • Thread starter Thread starter PhoenixRising
  • Start date Start date
  • Tags Tags
    Inertial Reference
AI Thread Summary
In the discussed train experiment, the load hangs at a constant angle, indicating that the train is an inertial frame of reference only if the angle is 90 degrees, meaning the load is vertical. If the angle is less than 90 degrees, the train must be accelerating. The train may be at rest or moving at a constant speed in a straight line, but it cannot be moving in a circle or accelerating if the load is not swinging. The analysis of forces shows that if the load is accelerating, the train is also accelerating at the same rate. Understanding these concepts is crucial for mastering the principles of inertial reference frames.
PhoenixRising
Messages
3
Reaction score
0

Homework Statement


You are conducting an experiment inside a train car that may move horizontally along rail tracks. A load is hung from the ceiling on a string. The load is not swinging, and the string is observed to make a constant angle of with the horizontal. No other forces are acting on the load. Which of the following statements are correct?


Statements include:
The train is an inertial frame of reference.
The train is not an inertial frame of reference.
The train may be at rest.
The train may be moving at a constant speed in a straight line.
The train may be moving at a constant speed in a circle.
The train must be speeding up.
The train must be slowing down.
The train must be accelerating.

Please help, and if you could, explain why as well. I am doing these as practice for an exam and would really like to lock down the concept.
 
Physics news on Phys.org
"and the string is observed to make a constant angle of with the horizontal"

The answers depend on whether this angle is 90 degrees (i.e., hanging vertically) or some other angle.

Should the word 'horizontal' be replaced with 'vertical'?
 
it's a 45 degree angle from the horizontal, sorry :)
 
The train is an inertial frame of reference.
The train is not an inertial frame of reference.

Draw a free body diagram of the load. If F = ma indicates that a is 0, its inertial; if a is not 0, its not inertial. You should find that a not zero, and it is constant.

The train may be at rest.

The load in moving and accelerating at the same rate as the train. Answer the question: Can an object be accelerating if its velocity is zero? Is an object tossed in the air accelerating at the peak of its path?

The train may be moving at a constant speed in a straight line.

Can't be if its accelerating.

The train may be moving at a constant speed in a circle.

In this case, is its acceleration constant?

The train must be speeding up.

Nope.

The train must be slowing down.

Nope

The train must be accelerating.

Yep.
 
Thank you, hard to wrap my head around it all sometimes.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top