Is Interviewing an Engineer for a School Project Allowed at PF?

  • Thread starter Thread starter Dannyarizpe
  • Start date Start date
  • Tags Tags
    Engineer Interview
Dannyarizpe
Messages
1
Reaction score
0
Can I interview an engineer for a sophomore school project?
 
Engineering news on Phys.org
Dannyarizpe said:
Can I interview an engineer for a sophomore school project?

Welcome to the PF.

No, sorry, for privacy and anti-phishing reasons, interview threads are no longer allowed at the PF.
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »
Thread 'What's the most likely cause for this carbon seal crack?'

Thread 'What's the most likely cause for this carbon seal crack?'

We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
View full post »

Similar threads

Mechanical Engineer Career. Short 3 question interview.
Replies
1
Views
1K
Degrees of freedom (question based on an interview I attended)
Replies
6
Views
2K
Mechanical Engineering projects
Replies
2
Views
1K
Can You Help Find a Mechanical Engineer for an Urgent Student Interview?
Replies
1
Views
1K
Spotting gearbox assembly issues
Replies
1
Views
1K
I need to interview an engineer for a school project.
Replies
1
Views
2K
Mechanical Engineer Needed for Interview Please
Replies
3
Views
1K
Help Needed: Experienced Mechanical Engineer for Interview
Replies
2
Views
1K
Need to interview a Mechanical Engineer
Replies
1
Views
2K
Professional Mechanical Engineer Interview
Replies
1
Views
2K

Hot Threads

Recent Insights

Back
Top