Is Sliding Down a Falling Tree Safer Than Free Falling?

  • Thread starter Thread starter taloz
  • Start date Start date
  • Tags Tags
    Torque
AI Thread Summary
The discussion revolves around whether it is safer to free fall from a falling tree or to hold on and ride it down. The physics concepts of force, torque, and angular acceleration are central to the analysis, with the force of gravity acting on the person during free fall calculated as 9.8 times their mass. The confusion arises in determining the force acting on a person in rotational motion as the tree falls, particularly regarding how torque changes during the fall. The teacher suggests that holding onto the tree is 1.2 times more dangerous than free falling, prompting the need for a logical explanation and calculations to support this conclusion. Ultimately, it is suggested that sliding down the tree, akin to using a firepole, is the safer option.
taloz
Messages
5
Reaction score
0

Homework Statement



A person is atop a tree as it is cut down. Should he push off from the tree and fall freely to the ground or hold on and ride the tree to the ground?It would be a good idea to lay down some physics formulas to support your argument.

Homework Equations



F=ma
Torque = I*Angular Acceleration

angular acceleration = V^2 /r

The Attempt at a Solution


My teacher told our class that we should look at the force acting on the person as they fall.

I know that in free fall the force acting on the person would be (9.8*mass) Newtons because F=ma and a= -9.8 m/s.

With that said, I'm very confused as to how to find the force acting on a person as they accelerate in rotational motion. The reason for this is that i know that the force of gravity is a torque that makes the tree-- and the person attached to it-- fall faster. However, the torque due to the force of gravity should change as the tree falls further and further down. because of this, i don't know how to calculate how much force the person has acting on him/her.

As a note, my teacher has told me that it is 1.2 times more dangerous to hold on to the tree-- i know that free falling is safer-- but wants my class to show the logic and work that brings us to this conclusion. I'm utterly lost.
 
Last edited:
Physics news on Phys.org
torque = R X F = I*w

since force is acting perpendicular to the branch it can be rewritten as

R*F = I*w
 
But, without using numbers and just variables, how can i quantify the force of I*w/R in terms of just mass as i use 9.8*m as the force of the other one?

I don't have any numbers to use here, nor do i know the moment of inertia in this situation.

also, isn't torque = I* angular acceleration not I * the angular velocity?
 
Last edited:
can anyone help me please? My teacher's question is not phrased very well so i don't understand how to go about solving it.
 
It's a trick question. The person should slide down the tree like a firepole.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top