Magnetic Field around a Bundle of Wires

AI Thread Summary
The discussion focuses on calculating the magnetic force per unit length on a wire located 0.200 cm from the center of a bundle of 100 insulated wires, each carrying 1.50 A. The magnetic field is derived using the formula B = (mu_0 * I * r) / (2 * pi * R^2), where mu_0 is the permeability of free space. The participants calculated a magnetic field value of approximately 9.375e-4, indicating it falls within a range of 10% to 100% of the expected answer. They also noted the need to multiply by 100 to account for all wires in the bundle. Assistance is requested for a quick solution to finalize the calculations.
martellaj
Messages
3
Reaction score
0

Homework Statement


A packed bundle of 100 long, straight, insulated wires forms a cylinder of radius R = 0.800 cm. If each wire carries 1.50 A, what are the magnitude and direction of the magnetic force per unit length acting on a wire located 0.200 cm from the center of the bundle?


2. The attempt at a solution
My friend and I have been going over this problem for a while - this is what we have come up with so far:

Without a picture, we have decided the bundle is like a pull and peel Twizzler, just a bundle of 100 straight wires. The radius that we're attempting to find the force per unit length is .200 cm away, which is obviously smaller than the radius of the entire bundle so we're using:

B = (mu_0 * I * r) / (2 * pi * R^2)

- B is the magnetic field
- mu_0 is 4*pi*e-7
- I is 1.5 A
- r is .002 m
- R is .008 m

The answer we got was something like 9.375e-4, which is apparently within 10% to 100% of the actual answer, so the answer will be in the e-4 magnitude.

Any help would be great, and sorry I couldn't write the equation all fancy-like. Cheers.
 
Physics news on Phys.org
And I forgot to mention that we did in fact multiply the equation used by 100 to take in account of all 100 wires.
 
Can anyone solve this in 3 minutes? It'd be great.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top