Magnetic force created by one wire over another

AI Thread Summary
To balance the weight of the upper wire, the current in each wire must be approximately 15 A. The magnetic force created by the lower wire must equal the weight per unit length of the upper wire, which is 10^-4 N/m. The calculation involves using the formula for the magnetic force between two parallel currents, leading to the conclusion that the currents must flow in opposite directions to create a repulsive force. The correct current direction is one flowing left to right and the other flowing right to left. The discussion highlights the importance of careful calculations and understanding the principles of magnetic forces in parallel conductors.
Parad0x88
Messages
73
Reaction score
0

Homework Statement


Two wires, each having a weight per unit length of 10–4 N/m, are strung parallel, one 0.3 m above the other. If the wires carry the current of same magnitude, how great must the current in each wire be for the magnetic field due to the lower conductor to balance the weight of the upper conductor? What have to be the directions of the two currents for that to work?


Homework Equations


Since we are not given any length, we must work per unit of length, in this case meters.

Weight = mass X gravitational acceleration.

Since we are already given the weight, we simply must find the equivalent force to create an equilibrium.

We also know I1 = I2

F1 = (μ0I1I2)/(2pi X a)

The Attempt at a Solution



Simply solve for I, since I1 = I2, we can re-write:

10-4 N = (μ0I2)/(2pi X a)
 
Physics news on Phys.org
OK, so far, so good. So what's the answer?
 
AJ Bentley said:
OK, so far, so good. So what's the answer?

Oh well I had assumed if the formula was good I wouldn't have to go all the way here, but here goes:

(4pi X 10-7 X I2) / (2pi X 0.3)

FB = (2 X 10-7 X I2) / .3

FB = 6.667 X 10-6 X I2

I2 = 10-4 / 6.667 X 10-6

I2 = 15

I = 3.87

As for the direction, let's see if I can figure this out, and use what you have taught me in the previous problem :D.

We want them to repel each other. If both wires have the same current direction, they would attract each other, therefore one has to flow left to right, and the other right to left
 
You lost a factor of 10 halfway. Otherwise good.
 
AJ Bentley said:
You lost a factor of 10 halfway. Otherwise good.

Awesome, thanks! And yeah you're right, should be 6.667 X 10-7
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top