Master Heat Transfer with Engaging Videos - Improve Your Understanding Today!

AI Thread Summary
Heat transfer can be challenging to grasp, and many learners seek engaging resources to enhance their understanding. Visual aids, such as images and videos, can significantly aid in comprehending the concepts involved. A suggested resource is a collection of heat transfer images available through Bing, which may provide clarity for beginners. Experiment-based learning is also encouraged for a practical understanding of the subject. Utilizing these tools can improve one's grasp of heat transfer effectively.
noxnoxmox
Messages
6
Reaction score
0
Hey guys

I really have difficulty learning heat transfer and I wish if someone knows a website that includes experiment or some kind of help.

Thanks and I appreciate your time
 
Engineering news on Phys.org
Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
Back
Top