Maximum speed on conservative forces problem

AI Thread Summary
The discussion focuses on calculating the maximum speed of a girl swinging on a playground swing, with her highest point at 3 m and lowest at 0.5 m, under the influence of gravity. The conservation of energy principle is applied, equating potential energy at the highest point to kinetic energy at the lowest point. The initial velocity is assumed to be zero at the highest point, simplifying the calculations. The correct formula derived is gh1 = (1/2)v^2 + gh2, allowing for the calculation of velocity by plugging in the height values. Ultimately, the solution emphasizes the importance of using the correct heights and understanding energy conservation in the problem.
fanie1031
Messages
12
Reaction score
0
1. A girl swings on a playground swing in such a way that at her highest point she is 3 m from the ground, while at her lowest point she is 0.5m from the ground. The acceleration of gravity is 9.8m/s^2. What is her maximum speed? Answer in units of m/s.


2. 1/2mVf^2 + mgyf = 1/2mVi^2 + mgyi


I made initial velocity to equal zero.
3. [Vf= (mghi - mghf)/ (1/2m)]^(1/2)

When I do this... I endup square rooting a negative number. What am I doing wrong?
 
Physics news on Phys.org
What do you use for initial and final height?

Is the velocity actually zero at the initial height?
 
I'm using .5 as her initial height and 3 as her final height. Is that my problem? And velocity... I just assumed... that may be wrong. (Thanks for the quick reply by the way!)
 
OOh I got it! I did this:

v=[2(gVi-gVf)]^(1/2)

You sparked my thinking. Thank you.
 
The problem mentions nothing about air resistance so we can assume that our forces our conservative. This meas that the sum of your forces at position 1 (her highest point) is equal to the sum of the forces at position 2 (her lowest point).

KE1 + PE1 = KE2 + PE2

You can elimitate your KE1 because at her highest point the girls velocity is 0.

This leaves us with PE1 = KE2 + PE2 We expand this formula to:

mgh1 = (1/2)m[v(squared)] + mgh2

this can be simplified by canceling out all of your masses.

gh1 = (1/2)[v(squared)] + gh2

Now just plug in your values and solve for your velocity.

Edit: Nevermind, you beat me to it.
 
Oh thank you for going ahead and writting up the solution.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top