How do you calculate maximum shear stress in an eccentrically loaded cylinder?

  • Thread starter Thread starter Su Solberg
  • Start date Start date
  • Tags Tags
    Mechanics Torsion
AI Thread Summary
To calculate maximum shear stress in an eccentrically loaded cylinder, it's essential to clarify the specific parameters of the load application. The discussion highlights the need for a more detailed explanation or visual representation to facilitate understanding. One suggestion includes replacing the eccentric moment with a force and moment applied at the axis of the shaft. Participants express a willingness to assist further once more information is provided. Clear communication and specific details are crucial for accurate calculations in this context.
Su Solberg
Messages
72
Reaction score
0
Hello everyone,
How can I caculate the maximum shear stress for an eccentric torsion at a cylinder?

Thanks in advance
 
Last edited:
Engineering news on Phys.org
Welcome to PF, Su.
It might just be due to my lack of formal education, but your question makes no sense to me. Can you be more specific as to what you want to know?
 
how about replacing the eccentric moment with a force & moment at the axis of shaft.
 
Thanks for your replies

Danger said:
Welcome to PF, Su.
It might just be due to my lack of formal education, but your question makes no sense to me. Can you be more specific as to what you want to know?

It's just because i am not an English speaker, lol.

I think present it in a picture will be more effective.
It is attached as attachment below.
ank_gl said:
how about replacing the eccentric moment with a force & moment at the axis of shaft.

can u describe more on how to get that "force"??

Thanks for your help.
 

Attachments

  • PNG.PNG
    PNG.PNG
    6 KB · Views: 506

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Find 3D Printer & Software Resources for Prototype Creation'

I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
View full post »

Similar threads

Spring and its shear, torsion, tensile stresses...
Replies
1
Views
2K
Maximum shear stress in an assymetric cross-section
Replies
4
Views
2K
Hertzian contact pressure & shear stress
Replies
5
Views
5K
Shear flow in thin-walled members -- Hibbeler confusion
Replies
1
Views
3K
Principal Stresses in a Shear Flow
Replies
1
Views
1K
Determine the strength of a Bolt-Nut combination
Replies
12
Views
5K
Why do we use avg shear stress and not max shear stress?
Replies
4
Views
3K
What is torsional modulus, and where is it specified?
Replies
3
Views
3K
Question about torsional shear stress
Replies
5
Views
2K
How Do You Calculate Deflection and Shear Stress in a Tapered Shaft?
Replies
2
Views
3K

Hot Threads

Recent Insights

Back
Top