Momentum and Collision with a seat belt

AI Thread Summary
In a head-on collision at 60.0 mi/h, a 12.0-kg child would experience a significant force during deceleration, calculated using the formula F=ma. The acceleration can be determined from the change in velocity over the time of 0.0500 seconds, leading to a substantial force that would likely exceed the strength of a person holding the child. This indicates that the seat belt alone would not prevent the child from being torn from the person's arms. Additionally, in an elastic collision between two protons, if they have equal speeds after the collision, their velocities can be expressed in terms of the initial speed. The direction of the velocity vectors will also change post-collision, reflecting the conservation of momentum.
ankurx13
Messages
2
Reaction score
0
Need some help, got a 50 question review packet of questions to finish and am having trouble with these 2. please and thank you:

1. A friend claims that as long as he has his seat belt on, he can hold on to a 12.0-kg child in a 60.0 mi/h head-on collision with a brick wall in which the car passenger compartment comes to a stop in 0.0500 s. Show that the violent force during the collision will tear the child from his arms.

2. A proton, moving with a velocity of vii, collides elastically with another proton that is initially at rest. If the two protons have equal speeds after the collision, find (a) the speed of each proton after the collision in terms of vi and (b) the direction of the velocity vectors after the collision.
 
Physics news on Phys.org
i would really appreciate some help guys.
 
ok so for question 1
what you want to figure out is the force exerted by the 12kg as it decelerates from 60->0 in.05 seconds

there is a formula that says
v=u+at
which means your final velocity is equal to your inital velocity plus acceleration multiplied by time
so knowing that your final velocity is zero and time is .05 you can work out "a"

be carefull because 60mph is about 100kmph which about 1700 m/minute
which is about 30 odd m/s [prob a bit less than that]

anyway point is you now have "a"
you also know the mass of the child which i'll call "m"

now you calculate the force required to produce this acceleration [or deceleration] for this mass.
F=ma

i'm guessing it would be like trying to lift a half ton. anyway your neck would probably break.
-----------------------------------------------------------
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Replies
2
Views
2K
Replies
5
Views
2K
Replies
2
Views
2K
Replies
1
Views
1K
Replies
16
Views
2K
Replies
7
Views
4K
Replies
10
Views
1K
Replies
1
Views
1K
Back
Top