Calculating Multistage Rocket Velocities

  • Thread starter Thread starter Piamedes
  • Start date Start date
  • Tags Tags
    Rocket
AI Thread Summary
The discussion focuses on calculating the final speed of a multistage rocket using the rocket equation. In the first scenario, where 60% of the initial mass is fuel, the final speed is derived as a multiple of exhaust velocity. The second scenario, involving two stages of fuel burning and tank jettisoning, results in a higher final speed compared to the single-stage burn. Participants note that the calculated speeds appear low relative to exhaust velocity, which is typical for chemical rockets. The conversation concludes with an acknowledgment of the inherent inefficiency of rockets, which often consume 90-95% of their mass as fuel.
Piamedes
Messages
41
Reaction score
0

Homework Statement


To illustrate the use of a multistage rocket consider the following:

(a) A certain rocket carries 60% of its initial mass as fuel. (That is, the mass of fuel is .6m0). What is the rocket's final speed, accelerating from rest in free space, if it burns all its fuel in one stage? Express your answer as a multiple of v exhaust.

(b) Suppose instead it burns the fuel in two stages as follows: In the first stage it burns a mass of .3m0 of fuel. It then jettisons the first-stage fuel tank, which has a mass of .1m0 and then burns the remaining .3m0 of fuel. Find the final speed in this case, assuming the same value of v exhaust throughout and compare.

Homework Equations



v - v_{0} = v_{ex} ln [\frac{m_{0}}{m}]

The Attempt at a Solution



For part a)

v - 0 = v_{ex} ln [\frac{m_{0}}{.4m_{0}}

v = v_{ex} ln [\frac{1}{\frac{2}{5}}]

v = v_{ex} ln [\frac{5}{2}]

For part b)

v_{1} - 0 = v_{ex} ln [\frac{m_{0}}{.7m_{0}}]

v_{1} = v_{ex} ln [\frac{1}{\frac{7}{10}}]

v_{1} = v_{ex} ln [\frac{10}{7}]

v_{2} - v_{1} = v_{ex} ln [\frac{.6m_{0}}{.3m_{0}}]

v_{2} - v_{1} = v_{ex} ln [2]

v_{2} = v_{ex} ln [2] + v_{1}

v_{2} = v_{ex} ln [2] + v_{ex} ln [\frac{10}{7}]

v_{2} = v_{ex} {ln [\frac{20}{7}] }

Is this the proper way to calculate multistage rocket velocities, or am I missing an important step? Because in both cases the final velocity seems to very small in comparison to the exhaust velocity, or is that just how rockets work?

Thanks for any and all help
 
  • Skeptical
Likes Rauuu_2001 HN
Physics news on Phys.org
The answers you have are correct. That is just the way chemical rockets work. The rocket equation is just mean and nasty.

Most rockets the go into space burn a lot more than 60% of their mass in the form of fuel. Its more like 90 to 95%.
 
Thanks, I guess it just seemed odd that they're so inefficient.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top