Name a physical quantity used to measure optical density of a Medium

AI Thread Summary
The discussion revolves around the measurement of optical density in a medium, with a focus on electromagnetic waves and induced electromotive force (e.m.f) in different loop shapes. It highlights the differences in e.m.f induced in rectangular and circular loops as they exit a magnetic field. Additionally, participants suggest that electric and magnetic fields are key physical quantities associated with electromagnetic waves. The conversation emphasizes the importance of understanding these concepts in the context of physics. Overall, the thread seeks clarification on specific physical quantities related to optical density and wave definitions.
devrudra07
Messages
2
Reaction score
0
1.A rectangular loop and a Circular loop are moving out of a uniform magnetic field to a field free region with a constant velocity V.In which loop the induced e.m.f is constant during the motion of the loop.

2.Name two Physical quantifies other than velocity,wavelength and C,associated with electromagnetic waves.

3.Name a physical quantity used to measure optical density of a Medium.

:smile:
 
Physics news on Phys.org
In a rectangular loop what is the overall emf induced? In a circular coil, what is the emf induced?

2) What do you think defines waves?
 
rock.freak667 said:
In a rectangular loop what is the overall emf induced? In a circular coil, what is the emf induced?

2) What do you think defines waves?

i've given the complete question.nothing more to it.
i guess the ans to second one is electric and magnetic field.just checking
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top