Navigating the Wind: A Pilot's Challenge

  • Thread starter Thread starter lankan911
  • Start date Start date
  • Tags Tags
    Challenge Wind
AI Thread Summary
To return to the starting point, the pilot must account for the northwest wind blowing at 60 km/h while flying at 140 km/h. The flight path consists of four legs: due East, South, West, and North, each lasting one hour. By breaking down the vectors into components, the pilot can determine the necessary adjustments to counteract the wind's influence. It's crucial to keep the wind's vector separate from the plane's intended heading for accurate calculations. Ultimately, the pilot must calculate the correct heading and duration to effectively navigate back to the original position.
lankan911
Messages
1
Reaction score
0
A pilot flies at 140 km/h. The heading is due East for 1 hour,due South for 1 hour, due west for 1 hour and due north for 1 hour. IF a steady wind blows at 60 km/h, how long and at what heading must he fly to return to the start point?

The wind is blowing in a northwest direction
 
Last edited:
Physics news on Phys.org
Do you think it would help to know the direction of the wind?
 
You set this up so you can add vector components. For example, if East is the positive x and North is the positive y, your first leg is:

(140,0) km + (-42.4,42.4) km

You find the x component by multiplying the magnitude by the cosine of the heading. 'x' is always your principle axis (unless the problem specifically states otherwise). All your angles are measured from your principal axis. North would be positive 90 degrees, with North West being another 45 degrees past North. You find the y component by multiplying the magnitude by the sine of the heading.

Set each leg up like this. It's definitely to your advantage to keep the wind component separate from the plane's desired heading for each leg. (In fact, you could keep the wind in polar coordinates, NW at 60 km/h, until the very end if you wanted to and add them in last).
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top