Number of Steps on a Stationary Escalator with Varying Person Speeds

  • Thread starter Thread starter tomas krchnak
  • Start date Start date
AI Thread Summary
The discussion revolves around calculating the number of visible steps on a stationary escalator based on the movements of two individuals, A and B, who ascend while the escalator is in motion. A takes 50 steps and B takes 75 steps, with their speeds related by the time taken to step. The equations derived lead to a system that ultimately suggests the total number of steps on the escalator is 100, but there is confusion regarding the visibility of steps and the reasoning behind dividing by 2. Clarifications highlight that the escalator's movement contributes to the total steps taken by A and B, and the calculations are confirmed as correct. The discussion concludes with an understanding of the relationship between the escalator's speed and the steps taken by each person.
tomas krchnak
Messages
1
Reaction score
0

Homework Statement


There is a escalator and 2 persons move up it. A takes 50 steps and B takes 75 steps while the escalator is moving up. Given that the time taken by A to take 1 step is equal to time taken by B to take 3 steps, find the no. of steps in the escalator that is possible to see while it is staionary.?

Homework Equations

The Attempt at a Solution


v is the speed of persons (A=1v, B=3v)
x is the number of stairs
y is the speed of escalator
so:
50/v=(x-50)/y
75/3v=(x-75)/y
I make from that:
(50y/v)+50=x
(25y/v)+75=x
and then i remove fractions and have system of equations
50y+50v=xv
25y+75v=xv *(-2) equivalent adjustment

50y+50v=xv
-50y-150v=-2xv

-100v=-xv
-100=-x
x=100
Now I got the number of steps so if I do 100/2=50 is the number of steps we can see if it is stationary.

I just want to ask if is everything right.
And.. I´m not good in english so there are many mistakes in it, so sorry
 
Physics news on Phys.org
I don't see why you divided by 2 at the end.
If only 50 steps are visible, how would B have taken 75 to get to the top?
 
I don't see how (x-50)/y= 50/v
Same with the one below it.
Y may be any velocity
 
bamia said:
I don't see how (x-50)/y= 50/v
Same with the one below it.
Y may be any velocity
If A only took 50 steps but rose x steps in the process then the movement of the escalator was responsible for achieving the other x-50 steps in the same time.
A took time 50/v, the escalator took time (x-50)/y.
 
  • Like
Likes bamia
Thank you. I get it now.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top