Optimizing Damping Time: Which Application Would Benefit Most?

AI Thread Summary
A short damping time is crucial for applications requiring quick stabilization, with the discussion focusing on a bathroom scale, child jolly jumper, and suspensions for passenger and race cars. The consensus leans towards the race car suspension benefiting most from a short damping time due to the need for rapid response and control during high-speed maneuvers. In contrast, the bathroom scale may also require a quick response but is less critical than the race car. The concept of overdamping is explored, suggesting that while both the scale and race car could benefit from overdamping, the race car's performance demands are more significant. Ultimately, the race car suspension is identified as the application that would benefit the most from optimized damping time.
RedEyes
Messages
2
Reaction score
0

Homework Statement


"Which of the following applications would have the most benefit from a short damping time?"
a. bathroom scale
b. child jolly jumper
c. suspension on passenger car
d. suspension on race car

Homework Equations

The Attempt at a Solution


Im assuming that both A and D should be as damped as possible, so its more of a question as to which one has a shorter damping time and/or which one objectively benefits the most from it. Thanks.
 
Physics news on Phys.org
I would ask myself: which one, if any, would benefit from being overdamped.
 
DrClaude said:
I would ask myself: which one, if any, would benefit from being overdamped.
It would be my understanding that both A and D would benefit from being over damped. It is my teacher's opinion (justified or not); however, that one is a better answer. I am trying to figure out which one that is.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Replies
2
Views
3K
Replies
4
Views
10K
Replies
131
Views
7K
Replies
14
Views
4K
Replies
9
Views
3K
Replies
1
Views
3K
Back
Top