Period of oscillation of spring system

AI Thread Summary
The discussion focuses on determining the period of oscillation for a spring system consisting of two blocks, each of mass M, connected by a spring with force constant k. When the left block is released from a compressed position against a wall, the period of oscillation is given as period = 2(pi)sqrt(M/(2k)), which arises from considering the reduced mass of the system as M/2. Participants express confusion about the motion of the right block after the left block leaves the wall and seek clarification on the mechanics involved. Visualizing the motion and understanding the effective spring constant, which doubles when considering the spring's two halves, is emphasized as crucial for grasping the problem. The discussion highlights the need for further explanation and possibly visual aids to clarify the dynamics of the system.
SbCl3
Messages
5
Reaction score
0
1. Question
A system consists of two blocks, each of mass M, connected by a spring of force constant k. The system is initially shoved against a wall so that the spring is compressed a distance D from its original uncompressed length. The floor is frictionless. The system is now released with no initial velocity. (See picture)

[part c] Determine the period of oscillation for the system when the left-hand block is no longer in contact with the wall.

Homework Equations



period = 2(pi)sqrt(m/k)

The Attempt at a Solution



The answer given is this: period = 2(pi)sqrt(M/(2k))
The explanation given is "m = reduced mass = M/2".

I don't understand the explanation given. I can't visualize what happens to the right mass M after the left mass M leaves the wall. This is different from all spring problems I have seen, where one end is attached to a wall, so of course I suspect a different answer. Could someone show me the math involved to prove the period is reduced like this?
 

Attachments

  • temp.png
    temp.png
    2.4 KB · Views: 608
Physics news on Phys.org
SbCl3 said:
The answer given is this: period = 2(pi)sqrt(M/(2k))
The explanation given is "m = reduced mass = M/2".

I don't understand the explanation given. I can't visualize what happens to the right mass M after the left mass M leaves the wall. This is different from all spring problems I have seen, where one end is attached to a wall, so of course I suspect a different answer. Could someone show me the math involved to prove the period is reduced like this?

Hi SbCl3! :smile:

Divide the spring into two halves, then you can consider each half to be fixed against a wall (in c.o.m. frame of reference, of course) … the spring constant is doubled (1/K = 1/k + 1/k), and the mass is M :wink:
 
Can anyone please describe the motion qualitatively? I cannot visualize this problem. After the blow, the spring is maximally compressed and the block on the right moves to the right, away from the wall. I know that the left mass leaves the wall the first time that the right mass has its maximum speed to the right and the spring is at its equilibrium length. But I have no idea how the motion is after that.

All help appreciated.
Thanks
 
Please help this question has been giving me nightmares.
 
does anyone have a link to an animation
 
guys?
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'Collision of a bullet on a rod-string system: query'

Thread 'Collision of a bullet on a rod-string system: query'

In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Time period of SHM & Energy conservation in pulley-spring-block system
Replies
24
Views
3K
Distribution of Energy when work is done on a system of 2 masses connected by a spring
Replies
17
Views
1K
Mech#3 on 1974 AP "C" Exam -- 2 Blocks Connected by a Spring
Replies
3
Views
2K
Absolute motion analysis of pulley-spring system
Replies
10
Views
1K
Stretching of a rotating spring
Replies
8
Views
2K
How Does the Period of Oscillation Change When a Block Detaches from the Wall?
Replies
47
Views
6K
Derivation of the oscillation period for a vertical mass-spring system
Replies
9
Views
4K
Estimating damped harmonic oscillator parameters from this plot of the oscillations
Replies
9
Views
2K
Two spring-coupled masses in an electric field (one of the masses is charged)
Replies
1
Views
852
How Long for a Block in SHM to Hit a Wall After Spring Snaps?
Replies
6
Views
2K

Hot Threads

Recent Insights

Back
Top