Plate Capacitor: Distance Increases, C Decreases, V & Energy Increase

  • Thread starter Thread starter zdotcom
  • Start date Start date
  • Tags Tags
    Capacitor Plate
AI Thread Summary
When a plate capacitor is charged and then disconnected from the battery, increasing the distance between the plates results in a decrease in capacitance, as described by the formula C=keA/d. This decrease in capacitance leads to an increase in voltage, since the charge remains constant (q=CV). Although the electric field remains constant, the work done to separate the plates against their electrostatic attraction contributes to an increase in stored energy. The energy stored in the capacitor increases due to the relationship between capacitance and voltage, where energy is calculated as 1/2 C V². The discussion clarifies that the increase in stored energy is related to the work done in separating the plates rather than being purely kinetic.
zdotcom
Messages
5
Reaction score
0

Homework Statement


charge a plate capacitor, disconnect the battery, increase the distance between the plates: capacitance decreases (C=keA/d, as d increases, C must decrease),
V increases (q=CV, q is constant, C decreases, V must increase),
electric field stays constant (E=V/d, both V and d increase proportionally),
energy stored increases (energy= 1/2 C V*V, C decreases, but V increases and squares).


Homework Equations


see above.


The Attempt at a Solution


does it make sense that both the voltage and the energy increase as the distance between the plates increases? conceptually, I would think they would both decrease. can you help clarify? Thanks...
 
Physics news on Phys.org
If the charge is fixed, the electric field (volts per meter) between the plates is constant and uniform regardless of the separation. So if you increase the distance, you would have fewer volts per meter unless the voltage increases.

The plates attract each other. To separate them some more, you need to do work on them by pulling them farther apart against the electrostatic attraction. That work appears as additional potential energy stored in the capacitor. It's like stretching an already stretched spring even more.
 
Thanks and I have some follow on question.

for the voltage increase: I see your point and it make sense mathematically and logistically. It just runs a little against the grain to think the voltage would increase when the plates are pulled apart.
for the energy stored increase: so you mean the energy increase is kinetic instead of electric?
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top