Power Dissipation in 70W/240V Globe

AI Thread Summary
To determine the actual power dissipated by a 70W, 240V globe connected to a cord with two 0.6 ohm wires, first calculate the bulb's resistance using its rated values. The total circuit resistance includes the bulb's resistance and the resistance of the cord. By applying Ohm's law, the total current can be calculated, which is then used to find the actual power output of the bulb. The rated wattage is not a fixed value, and actual power dissipation may vary based on circuit conditions. Understanding these principles is essential for accurate power calculations in electrical circuits.
forevermoreOC
Messages
15
Reaction score
0
If you have a globe marked 70W and 240V and you connect it to one end of cord( which has two wires, each of 0.6 ohms), and the other end of the cord is connected to a 240V outlet, what is actual power dissipated by the globe?
 
Physics news on Phys.org
Here are a few pushes in the right direction.

The rating on the bulb (70W at 240 V) does not mean that either wattage or voltage is a "set" constant for the bulb. But from these two values, you can find a property that is constant for the bulb, specifically its resistance (assuming there is not significant difference in temperature between the rated and actual power output).

So, assume a voltge of 240V across the circuit, find the total current through the circuit (using total resistance), then find power output of the bulb.
 
Thanx for that advice, it was very helpful
 
Thread 'Collision of a bullet on a rod-string system: query'

Thread 'Collision of a bullet on a rod-string system: query'

In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
View full post »

Similar threads

Calculate the individual voltage, current and power in series and para
Replies
1
Views
1K
Graphing the Power dissipated in a resistor
Replies
1
Views
2K
Electric Potential across charging battery.
Replies
5
Views
1K
How Does Adding a Resistor Affect Power Dissipation in a Parallel Circuit?
Replies
9
Views
3K
Current, Power dissipation in a cord
Replies
6
Views
11K
What is the relationship between power and dissipated energy in cycling?
Replies
8
Views
2K
Electricity: Which globe uses most energy?
Replies
1
Views
2K
Power dissipated by a resistor in parallel
Replies
6
Views
8K
Electrical Circuits - Parallel vs. Series
Replies
14
Views
1K
AC, 2 appliances in parallel, one of them is disconnected
Replies
3
Views
1K

Hot Threads

Recent Insights

Back
Top