Power needed to keep car moving

  • Thread starter Thread starter VanKwisH
  • Start date Start date
  • Tags Tags
    Car Power
AI Thread Summary
To maintain a constant speed of 80 km/h for a 1200 kg car, the power required can be calculated using the formula P = W / t, where W is work done and t is time. The discussion highlights the need to determine the force acting on the car, which can be derived from the change in velocity and time. Participants express confusion over variable definitions and conversions between horsepower and watts, noting that 1 horsepower equals approximately 746 watts. The conversation emphasizes the relationship between force, distance, and power, suggesting that understanding these concepts is crucial for solving the problem. Ultimately, the calculation of power needed to keep the car moving involves understanding the forces at play and applying the correct equations.
VanKwisH
Messages
107
Reaction score
0

Homework Statement


A 1200 kg car slows down from 90km/h to 70 km/h in about 5.0s on the level when it is in neutral. Approximately what power ( in watt's and hp ) is needed to keep the car traveling at a constant 80km/h?


Homework Equations


P = W / t


The Attempt at a Solution


I really have no idea ... and
how much does 1hp = in watts and in joules ?
550 ft lbs/s = in joules and watts?
 
Physics news on Phys.org
P=\frac{dW}{dt}=\frac{d}{dt}(Fs)=F\frac{ds}{dt}=Fvif you have the change in velocity and the time it acts for...you can find acceleration and F=ma...so you can find the power
 
what does each of ur variables mean?? cause i think i use a different variables than u do and i find it confusing to understand
 
Oh well from the definition of power, the rate at which work,W, is done =\frac{dW}{dt} since work done= Force(F)*distance(s) i.e.\frac{dW}{dt}=\frac{d}{dt}(Fs) since force is constant you can then re-write it like \frac{d}{dt}(Fs)=F\frac{ds}{dt} and well v=\frac{ds}{dt}

In short: F=Force of car
P=power
v=velocity of car
 
wha ? so the answer is?
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top