Programmable Bluetooth Transmitter for Extended Range - No Cellphone Required!

AI Thread Summary
A user seeks assistance in building a programmable Bluetooth transmitter that broadcasts a continuous signal detectable by cellphones, with the ability to program the signal's name. The device should operate independently of a cellphone, requiring only a power source and an optional connection to a computer for programming. The desired transmission range is between 800 to 1000 meters (2400-3000 feet), without the need for two-way communication. Suggestions for Bluetooth transmitter kits and modules were requested to aid in the construction of this device. The discussion emphasizes the need for practical solutions in electronics design.
binary_code
Messages
1
Reaction score
0
---bluetooth transmitter------

hello every one I'm new on this site
and this is the only forum i discovered so far that deals with electronics
i need some help
i'm trying to build a programmable bluetooth transmitter
all i want from that transmitter is this
i need to make a box (not a cellphone)
that connects to power and antenna and a optional connection to a computer (usb, rs232, or parallel, lan, it doesn't matter how) just to program it
and all i want it to do is broadcaster a continues signal on bluetooth frequency so cellphones
can see it, what would be programmable is the name of the signal
and i need it to transmit for about 800 to 1000 miters (2400-3000 feet)
i don't need from the phone to talk back or report back any thing...
just give a signal with a programmable name
if you have any info about any thing that can help me built this
<< personal information deleted by Mentors >>
 
Last edited by a moderator:
Engineering news on Phys.org


binary_code said:
hello every one I'm new on this site
and this is the only forum i discovered so far that deals with electronics
i need some help
i'm trying to build a programmable bluetooth transmitter
all i want from that transmitter is this
i need to make a box (not a cellphone)
that connects to power and antenna and a optional connection to a computer (usb, rs232, or parallel, lan, it doesn't matter how) just to program it
and all i want it to do is broadcaster a continues signal on bluetooth frequency so cellphones
can see it, what would be programmable is the name of the signal
and i need it to transmit for about 800 to 1000 miters (2400-3000 feet)
i don't need from the phone to talk back or report back any thing...
just give a signal with a programmable name
if you have any info about any thing that can help me built this
<< personal information deleted by Mentors >>

Welcome to the PF. What Bluetooth transmitter kits and modules have you looked at so far?

http://www.google.com/search?tbm=is...h+transmitter+module&gbv=2&aq=f&aqi=&aql=&oq=

.
 
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...
Back
Top