Projectile motion- acceleration due to gravity on the moon

AI Thread Summary
The discussion revolves around calculating the distance a golf ball hit by Alan Shepard on the moon would travel compared to Earth, given the moon's gravity is 1/6 that of Earth's. To solve the problem, participants suggest breaking down the initial velocity into its x and y components and using kinematic equations to find the time of flight and distance traveled. The equations provided include the vertical motion equation, which accounts for gravity, and the horizontal motion equation for distance. The key steps involve calculating the time of flight on both the moon and Earth, then comparing the distances traveled. This approach highlights the differences in projectile motion due to varying gravitational forces.
aurorabrv
Messages
4
Reaction score
0

Homework Statement


On the Apollo 14 mission to the moon, astronaut Alan Shepard hit a golf ball with a 6 iron. The acceleration due to gravity on the moon is 1/6 of its value on earth. Suppose he hits the ball with a speed of 18 m/s at an angle 45 degrees above the horizontal.

a) How much farther did the ball travel on the moon than it would have on earth? (answer in m)


b) For how much more time was the ball in flight?


Homework Equations





The Attempt at a Solution



I don't really know where to start at all, any hints for what to do would be greatly appreciated!

a)
18cos45= 12.73
18sin45= 12.73
 
Physics news on Phys.org
Do you know how to figure out how long it would be in flight if it was hit straight upward at a given speed?
 
Nope, I've never taken physics before, I'm pretty lost.

Would this be it?
y = y(i) + v(i)*sin(theta)*t + 1/2*g*t^2
 
Last edited:
On the Apollo 14 mission to the moon, astronaut Alan Shepard hit a golf ball with a 6 iron. The acceleration due to gravity on the moon is 1/6 of its value on earth. Suppose he hits the ball with a speed of 18 m/s at an angle 45 degrees above the horizontal.
a) How much farther did the ball travel on the moon than it would have on earth? (answer in m)
b) For how much more time was the ball in flight?

To start off, list what you know, it'll help you find a way to find what you're looking for. You know that
y-initial = 0m ax= 0 xf=?
x-initial = 0m ay=1/6[-9.81m/s(squared)] yf=0m (it lands back on the surface)
Vix=? t=? Vfx=?
Viy=? Vfy=?
Vi=18m/s
First, split the velocity into its x-component and y-component
Vix=cos45(Vi)
Viy=sin45(Vi)
now, you have everything you need to use yf=yi +Viyt + 1/2ayt(squared) to find time (on the moon)

after you've found the value of time, use the same equation for the x-component to find xf, which will be where the ball lands relative to the initial point. (on the moon)
xf = xi + Vixt +1/2axt(squared)

Now, on Earth, the initial velocities (both components), as well as x-initial, and y-initial and y-final will be the same as they were on the Moon. However, ay will now be
-9.8m/s(squared). So use that in the yf=yi +Viyt + 1/2ayt(squared) equation to find time (on Earth) and compare it to the time on the Moon. Then, using that time in that equation's x-component counterpart, find xf (on Earth) and compare that to the xf you calculated on the Moon.
Hope this helps, good luck!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top