Questions on momentum and collisions

AI Thread Summary
The discussion revolves around two physics problems involving momentum and collisions. The first scenario involves a 68.0 kg ice skater throwing a 0.15 kg snowball, and the goal is to find the velocity of a second skater who catches the snowball in a perfectly inelastic collision. The second scenario features a 92.8 kg astronaut who must return to a drifting spaceship by throwing a 0.560 kg wrench. Participants suggest using momentum conservation principles to solve these problems and recommend a resource for further assistance. The thread emphasizes the importance of understanding momentum equations to tackle such collision scenarios effectively.
John_Locke
Messages
2
Reaction score
0
Hey these could be simple questions with easy formulas and just plugging in but i don't have them my teacher is the worst teacher i have ever had in high school and what help i can get is appreciated

Homework Statement


A 68.0 kg ice skater moving to the right with a velocity of 2.99 m/s throws a 0.15 kg snowball to the right with a velocity of 22.7 m/s relative to the ground.

A second skater initially at rest with a mass of 60.50 kg catches the snowball. What is the velocity of the second skater after catching the snowball in a perfectly inelastic collision?
An 92.8 kg astronaut is working on the engines of a spaceship that is drifting through space with a constant velocity. The astronaut turns away to look at Earth and several seconds later is 28.7 m behind the ship, at rest relative to the spaceship. The only way to return to the ship without a thruster is to throw a wrench directly away from the ship. If the wrench has a mass of 0.560 kg, and the astronaut throws the wrench with a speed of 18.0 m/s, how long does it take the astronaut to reach the ship?

Homework Equations


none

The Attempt at a Solution


I don't really know where to start but i can figure out the momentum of the skaters
1) Momentum of skater is= p=mv
p=68(2.99)
P=136
Momentum of Snowball p=mv
p=.15(22.7)
p=3.405
for the Astronaut question i use Pi=Pf but i don't know how to break down the equation but i do something with the momentum of the wrench with distance and i don't know an equation for that
 
Last edited:
Physics news on Phys.org
thanks hage good website Bookmarked it =D
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top