Radiation HW on Alpha Particles

AI Thread Summary
To determine the energy needed for an alpha particle to penetrate the skin's epidermal layer, a user applied the equation R=0.56E, calculating the energy to be approximately 12 mEV. However, there was uncertainty about the correctness of the equation and unit compatibility. The user also considered an alternative formula, R=1.24E-2.62, which yielded a different result of 7.8 mEV. This prompted a discussion on the validity of both equations and their respective outcomes. Clarification on the appropriate formula and calculations is sought to confirm the correct energy value.
cconradi
Messages
2
Reaction score
0

Homework Statement



How much energy does an alpha particle need to penetrate the minimal protective epidermal layer of skin (Thickness ~7 mg cm-2



Homework Equations



Possibly R=0.56E, E,4
OR R=1.24E-2.62, 4<E<8


The Attempt at a Solution



I used the equation R=0.56E
so, I said that:

7 mg/cm^2=0.56E
then divided by 0.56 to get E=12.mEV

I guess I'm just not sure if I used to correct equation and am confused if the units match up.

Thanks for your help!
 
Physics news on Phys.org
I think it may be correct if I use to other formula actually. 7 mg/cm^2=1.24E-2.62
Do the math and it equals 7.8 mEv. Sound like a better answer?
Thanks!
 
Thread 'Have I solved this structural engineering equation correctly?'
Hi all, I have a structural engineering book from 1979. I am trying to follow it as best as I can. I have come to a formula that calculates the rotations in radians at the rigid joint that requires an iterative procedure. This equation comes in the form of: $$ x_i = \frac {Q_ih_i + Q_{i+1}h_{i+1}}{4K} + \frac {C}{K}x_{i-1} + \frac {C}{K}x_{i+1} $$ Where: ## Q ## is the horizontal storey shear ## h ## is the storey height ## K = (6G_i + C_i + C_{i+1}) ## ## G = \frac {I_g}{h} ## ## C...
Back
Top