Relative Circular Speed given radius and time

AI Thread Summary
The discussion centers on calculating the speed of a bird flying in a spiraling path with a radius of 6 meters every 5 seconds while also rising vertically at 3 m/s. The initial calculation for the circumference of the circular path is correct at approximately 37.699 meters, leading to a horizontal speed of about 7.54 m/s. However, to find the bird's total speed relative to the ground, the vertical speed must be added as a vector component. The confusion arises from understanding how to combine these horizontal and vertical velocities in a 3D context. Clarification on relative motion and vector addition is essential for accurately determining the bird's overall speed.
brh8447
Messages
2
Reaction score
0

Homework Statement


What is the speed of the object (a bird) relative to the ground?
We are given that a bird is flying in a spiraling path and rising on a thermal, making circles with a radius of 6m every 5s and rising strait up at a velocity of 3m/s.

Homework Equations



V=d/t
C=2πr=d

The Attempt at a Solution



My attempt at this problem was to solve the total distance the bird travels around the circle (this is our circumference (d))

C=d=2π(6m)=37.699m

Then use the general equation for velocity to find the velocity the bird must have in order to go this distance over the time of 5s.

V=37.699m/5s=7.5398m/s

This answer was wrong. I'm unsure of what velocity this gives me. I'm assuming that since it's circular motion, this is the vector that is the tangent of the circle. There is also the issue of its relativity to the ground. Since the birds motion in its circular path is in the x/y coordinate grid (the velocity upward being z) and I am considering the x/y plane to be the ground, where am I going wrong? Thanks so much for whoever is able to help!
 
Last edited:
Physics news on Phys.org
You have found the magnitude of the horizontal component of the velocity (tangent to the circular motion if the bird were not rising). To this, you need to add (vectorially) the vertical component.
 
Thanks TSny! I was confused with what exactly relative motion encompassed when considering what the motion was relative to when working with 3D vectors
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top