Solve RLC Circuit Problem - Small & Large Frequencies

AI Thread Summary
When analyzing an RLC circuit, at very low frequencies, the inductor behaves like a short circuit while the capacitor acts like an open circuit, resulting in most current flowing through the inductor. Conversely, at very high frequencies, the inductor behaves like an open circuit and the capacitor like a short circuit, causing most current to flow through the capacitor. The resonant frequency is determined by the formula wo=1/sqrt(LC). Understanding these behaviors allows for accurate predictions of current flow in the circuit. This knowledge is crucial for solving RLC circuit problems effectively.
spacemanrussell
Messages
6
Reaction score
0
RLC Circuit problem. Please Help!

Homework Statement



In the figure, what is the current supplied by the emf when the frequency is very small?

What is the current supplied by the emf when the frequency is very large?
knight_Figure_35_52.jpg

Homework Equations

I am not sure but:

wo=1/sqrt(LC)

Vr=IR

Vl=IXl

Vc=IXc
 
Last edited by a moderator:
Physics news on Phys.org
When the frequency is very small. XL = 2*pi*f*L is nearly zero and XC = 1/2*pi*f*C is near open circuit, and most of the current will flow through inductor branch
When the frequency is very high. XL = 2*pi*f*L very high and XC = 1/2*pi*f*C is near zero and most of the current will flow through capacitor branch.
 
For high enough frequencies you can replace the inductor with an open circuit, and replace the capacitor with a short circuit. For low enough frequencies you can replace the inductor with a short circuit and the capacitor with an open circuit.
 
Thank You!

I am pretty sure I will be able to get it now.
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Resonant frequency of L - R||C circuit
Replies
21
Views
1K
Calculation of current in driven series RLC circuit
Replies
8
Views
2K
Combined tensions of an RLC series circuit with AC current
Replies
3
Views
894
For a damped RLC circuit, why must R be small?
Replies
3
Views
2K
RLC Circuit: Calculate Resonant Frequency, Reactance & Impedence
Replies
1
Views
2K
Width of Resonance in RLC-circuit
Replies
14
Views
3K
RLC Circuits - Q Factor and Amplitude
Replies
3
Views
2K
Solve RLC Circuit Problem Homework
Replies
8
Views
2K
How to Determine Values of L and C in a Series RLC Circuit at Resonance?
Replies
8
Views
2K
Maximum Voltage Across Inductor in Series RLC Circuit Occurs at Which Frequency?
Replies
5
Views
3K

Hot Threads

Recent Insights

Back
Top