Rotary Water Pump Design & Mechanism: Get Expert Help Now

  • Thread starter Thread starter Moneim230
  • Start date Start date
  • Tags Tags
    Pumps Rotary
AI Thread Summary
Rotary water pumps, specifically centrifugal types, require extensive study to fully grasp their design and mechanisms. The original poster seeks more detailed drawings, sketches, and articles to enhance their understanding. Suggestions include using Google to find images and visiting pump manufacturer websites for basic principles. For in-depth design information, consulting specialized literature and texts is necessary. Comprehensive resources are essential for mastering the complexities of rotary water pump design.
Moneim230
Messages
5
Reaction score
0
hello all ,
i need some help about rotary water pumps (centrifugal)
design , mechanism , ...
can anyone help me please ?
 
Engineering news on Phys.org
You just asked a question that takes a good year's plus worth of study to fully understand. How about being a bit more specific?
 
FredGarvin said:
You just asked a question that takes a good year's plus worth of study to fully understand. How about being a bit more specific?

i read about the mechanism and the parts of the rotary water pump
but i need more drawings and sketches or some articles
i just need more information :rolleyes:
 
how about googling for images??
 
Start with google and look for pump manufacturers sites. Most will have a fair amount of information explaining the basic principles of their products. If you want to get into more detailed design information, you are going to have to consult literature and texts written for the study of pumps.
 
Thread 'Turbocharging carbureted petrol 2 stroke engines'

Thread 'Turbocharging carbureted petrol 2 stroke engines'

Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
View full post »

Thread 'HP Required to move a robot 10meters at 1.5m/sec'

I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
View full post »

Similar threads

Mechanism Ideas for: Rotary Action-input Pump?
Replies
9
Views
2K
How to determine the power of a rotary lobe pump?
Replies
8
Views
4K
Calibrating Pump/Venturi (Air) in a Closed Recirculating Water System
Replies
1
Views
400
What factors affect heat rejection in vacuum pump systems?
Replies
3
Views
3K
How Do You Calculate Torque for a Pusher Arm with a Dead Plate Friction?
Replies
1
Views
1K
Designing a controller for cooling of heat exchangers
Replies
6
Views
2K
Underground pump vault airflow considerations
Replies
15
Views
3K
Can Centrifugal Pump Displace Water Down? | Small Manned Submersible
Replies
15
Views
2K
Need a solution -- converting a translatory motion into rotary
Replies
3
Views
4K
Which Pump Can Safely Circulate Fluid with Glass Spheres?
Replies
24
Views
3K

Hot Threads

Recent Insights

Back
Top