Showing the sine-Gordon equation is satisfied.

  • Thread starter Thread starter varth
  • Start date Start date
AI Thread Summary
The discussion revolves around demonstrating that a soliton-antisoliton solution satisfies the sine-Gordon equation. The user struggles with differentiating the solution and simplifying the resulting expressions, particularly the term sin(4arctan(...)). Suggestions include rewriting hyperbolic functions in terms of exponential functions, which still lead to complex expressions. The user finds that using identities for sine and cosine helps simplify the calculations. Ultimately, they express gratitude for the assistance that clarified their approach to the problem.
varth
Messages
5
Reaction score
0

Homework Statement


I am currently trying to show a the sine-Gordon equation is satisfied by a 'soliton-antisoliton' solution. Basically, I need to differentiate twice w.r.t. t and x separately and plug in everything as usual but my expression is getting extremely complicated and I don't know how to deal with the sin(4arctan(...)) term (this will become clear in the relevant equations).


Homework Equations


sine-Gordon equation: (∂^2 θ)/(∂t^2) - (∂^2 θ)/(∂x^2) + sin(θ)=0
where the solution is θ(x,t)=4arctan[ (sinh{(ut)/SQRT(1-u^2)}) / (u cosh{x/SQRT(1-u^2)}) ]

The Attempt at a Solution


My attempt is rather messy so it might be a better idea if I don't write my working. However, what I have tried is differentiating directly but the expression didn't simplify and I didn't know what to do with sin(4arctan(...)). I was then told to rewrite sinh and cosh as exp functions but that still leaves a very complicated expression. I even tried doing it on Matlab (with cosh and sinh, not exp) but the LHS of the sine-Gordon equation doesn't simplify to 0 on Matlab, possibly due to the sine and arctan combining.. causing complication? Could anyone give me some tips?

Many thanks. I hope I have posted this in the correct thread!
 
Physics news on Phys.org
\sin\alpha=\frac{\tan\alpha}{\sqrt{1+\tan^2\alpha}}\Rightarrow \sin(\arctan 4y)=\frac{4y}{\sqrt{1+16y^2}}
 
Thanks for the reply! But I believe the expression sin(4arctan(...)), not sin(arctan(4...). I believe this complicates things?
 
Sorry, I misread it.
<br /> \sin\alpha=\frac{\tan\alpha}{\sqrt{1+\tan^2\alpha}},\,\cos\alpha=\frac{1}{\sqrt{1+\tan^2\alpha}}\\<br /> \sin 4\alpha=4\sin\alpha\cos^3\alpha-4\sin^3\alpha\cos\alpha\\<br /> \sin(4\arctan y)=\frac{4y-4y^3}{(1+y^2)^2}<br />
 
I believe that has done the trick, many thanks!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Replies
2
Views
2K
Replies
1
Views
3K
Replies
3
Views
2K
Replies
38
Views
3K
Replies
17
Views
850
Replies
4
Views
911
Back
Top