Solve Acceleration & Apparent Weight of Child on Ferris Wheel

AI Thread Summary
The discussion revolves around a physics problem involving a child on a Ferris wheel, focusing on the concepts of acceleration and apparent weight. The child has a weight of 750N and experiences an apparent weight of 650N at the highest point of the ride. The calculations reveal that the acceleration of the Ferris wheel can be determined using the relationship between normal force, gravitational force, and centripetal acceleration. The apparent weight at the lowest point is calculated to be 810N, indicating a significant increase due to the combined effects of gravity and centripetal force. The conversation emphasizes the importance of using the correct frame of reference to analyze forces acting on the child.
bob1182006
Messages
491
Reaction score
1
Not original #'s but same questions:

Homework Statement


A 750N child rides a ferris wheel that is moving at a constant velocity. At the highest point the child has an apparent weight of 650N.
(a) what is the acceleration of the wheel?
(b) what is the apparent weight of the child at the lowest point?

Homework Equations


F=ma
a=v^2/R

The Attempt at a Solution


Since the wheel is accelerating it's not an inertial frame so there's a pseudoforce (centrifugal?) acting on the child outward while the acceleration of the wheel is pointing inward to the center.

W=750N, W=mg, mg=750N, m=750N/g~76.4kg
(a).
at the top of the ferris wheel the child experiences the downward force of the acceleration and gravity. the centrifugal force (C) is upward:
C-mg=m(-a), C-mg=-ma
at the top -ma = apparent weight:
C-mg=650N, C=650N+mg=650N+750N=1400N

C/m-g=-a
g-C/m=a
9.81-(1400)/76.4kg=9.81-18.3=-8.49 m/s^2

(b).
at the bottom acceleration is up, gravity downward, as well as C.
-C-mg=ma
-1400N-750N=-2150N apparent weight, -gives direction down so the child thinks he weighs 2150N.

I'm not even sure if this problem has a numerical solution (no R, v given)
 
Physics news on Phys.org
bob1182006 said:
Since the wheel is accelerating it's not an inertial frame so there's a pseudoforce (centrifugal?) acting on the child outward while the acceleration of the wheel is pointing inward to the center.
Got to be careful here. Centrifugal force only appears if you insist on analyzing this from the noninertial frame of the rotating wheel, which is not necessary. Is that how your instructor wants you to solve such problems? (I would not recommend it.)

In any case, if you do choose to use pseudoforces and noninertial frames, do it right: The acceleration is zero in such a frame.

W=750N, W=mg, mg=750N, m=750N/g~76.4kg
(a).
at the top of the ferris wheel the child experiences the downward force of the acceleration and gravity. the centrifugal force (C) is upward:
C-mg=m(-a), C-mg=-ma
at the top -ma = apparent weight:
C-mg=650N, C=650N+mg=650N+750N=1400N

C/m-g=-a
g-C/m=a
9.81-(1400)/76.4kg=9.81-18.3=-8.49 m/s^2
Viewed from the noninertial frame there are three forces acting on the child:
> mg acting down
> normal force of the seat acting up (that's the apparent weight)
> the centrifugal pseudoforce acting up

These add up to zero.

Of course you always just use an inertial frame of reference, in which the child is centripetally accelerated. The only forces acting then are gravity and the normal force.
 
I've never done a problem like this, I'm used to when the radius is given and such.

So to analyze it in an inertial frame the wheel is accelerating so for the top I would have:

N-mg=-ma
N=-ma+mg
N=-650+750=100 (is that right? guess i screwed up my signs plugging in 650 for (-ma) ><).

and then continue from there? That's what I did though, so I thought I was analyzing the system from a noninertial frame but I just got Centrifugal force fromm there and used it in a inertial frame...which may have lead to a somewhat correct answer but improper reasoning :/
 
bob1182006 said:
I've never done a problem like this, I'm used to when the radius is given and such.

So to analyze it in an inertial frame the wheel is accelerating so for the top I would have:

N-mg=-ma
N=-ma+mg
This is correct, but solve for the acceleration not the normal force:
ma = mg - N
N=-650+750=100 (is that right? guess i screwed up my signs plugging in 650 for (-ma) ><).
No, not right. The apparent weight, which equals the normal force, is given. For some reason you set "ma = 650". (If you knew that, you'd be done! a is what we're trying to solve for.)
 
o right was thinking about part b...
-ma=-mg+N
a=-N/m+g, a=-650/74.6+9.81=1.1 m/s^2

then for part b:

N-mg=ma
N=ma+mg=m(a+g)=74.6(1.1+9.81)=810N

yeash I can't believe i messed up that badly on 1 question...At least I'm not alone with that, some people got a formula as the answer :/.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top