Solve AP Physics Problem: Reflection & Refraction at a Boundary

AI Thread Summary
To solve the AP Physics problem regarding reflection and refraction at a glass/air boundary, Snell's Law is essential, stating that n1sinø1 = n2sinø2. Given an angle of incidence ø1 at 30 degrees, the angle of refraction ø2 is calculated to be approximately 19.47 degrees using the refractive indices of air and glass. The angle ø3, corresponding to the reflected ray, is found to be about 130.53 degrees. The speed of light in glass is determined to be 2 x 10^8 m/s, and the wavelength of light in glass is calculated as approximately 3.33 x 10^-7 m. The largest angle of incidence that results in refraction is limited by the critical angle, which is not explicitly calculated in the discussion.
HashBrown
Messages
2
Reaction score
0
AP PHYSICS PROBLEM...i forgot the formula, someone help me solve! This won't take lon

Light of frequency 6.0 x 1014 hz strikes a glass/air boundary at an angle of incidence, ø1. The ray is partially reflected and partially refracted at the boundary as shown. The indices are shown.

(a) Determine the value of ø2 if ø1 = 30o. Explain your answer.
(b) Determine the value of ø3 if ø1= 30o.
(c) Determine the speed of this light in the glass.
(d) Determine the wavelength of this light in the glass.
(e) What is the largest value of ø1 that will result in a refracted ray?
 
Physics news on Phys.org
Which formula have you forgotten ?

The formula for the angle of refraction is called Snell's Law - look it up.

What does the law of Reflection say about angles of incidence and reflection ?

How is the speed of light in a medium related to the refractive index ? This is in one of the definitions of the refractive index.

Enough said already...
 


To solve this AP Physics problem, we will need to use Snell's Law, which states that the ratio of the sine of the angle of incidence to the sine of the angle of refraction is equal to the ratio of the speed of light in the first medium to the speed of light in the second medium. This can be written as n1sinø1 = n2sinø2, where n1 and n2 are the refractive indices of the two media.

(a) To determine ø2, we first need to find the refractive index of air and glass. The refractive index of air is approximately 1, while the refractive index of glass varies depending on the type of glass. For simplicity, we will assume the refractive index of glass is 1.5. Plugging these values into Snell's Law, we get:

n1sinø1 = n2sinø2
1sin30 = 1.5sinø2
0.5 = 1.5sinø2
ø2 = sin-1(0.5/1.5) = 19.47o

Therefore, the value of ø2 is approximately 19.47o.

(b) To determine ø3, we can use the fact that the sum of the angles in a triangle is 180o. Thus, we have:

ø3 = 180 - ø1 - ø2 = 180 - 30 - 19.47 = 130.53o

(c) To determine the speed of light in glass, we can use the formula v = c/n, where v is the speed of light in the medium, c is the speed of light in vacuum (3 x 108 m/s), and n is the refractive index of the medium. Thus, we have:

v = (3 x 108 m/s)/1.5 = 2 x 108 m/s

(d) To determine the wavelength of light in glass, we can use the formula λ = v/f, where λ is the wavelength, v is the speed of light in the medium, and f is the frequency of the light. Plugging in the values, we get:

λ = (2 x 108 m/s)/(6.0 x 1014 Hz) = 3.33 x 10-7 m

(e) The largest value of ø1 that will result in a refracted ray is when the angle
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top