Solving Impulse and Force Problems: Physics Help for Stopping Objects

  • Thread starter Thread starter shredmaster1013
  • Start date Start date
  • Tags Tags
    Physics
AI Thread Summary
To solve the impulse and force problems, the first question involves calculating the impulse needed to stop a 100kg mass traveling at -25m/s, which results in an impulse of 2500 N·sec. The second question requires determining the time it takes for a 45kg object moving at 900m/s to stop under a force of 430 N, yielding a time of approximately 94.19 seconds. The discussion emphasizes that impulse is the change in momentum, calculated as the difference between final and initial momentum. It also highlights the importance of using the correct formulas, such as impulse equals force times time. Momentum conservation is mentioned in relation to a separate scenario involving two colliding spheres.
shredmaster1013
Messages
3
Reaction score
0
I need help on these 2 questions.
1) What impulse if needed to stop a 100kg mass traveling at a velocity of -25m/s?

and

3) A force with a magnitude of 430 N is used to stop an object with a mass of 45kg moving at a velocity of 900m/s. How long will it take to bring the object to a full stop?

-Any help on formulas and how to solve this would be appreciated.. Thanx!
 
Physics news on Phys.org
it's been a while since I've done impulse, but if I remeber right, impulse is just the change in momentum. So 1) isn't really that bad. Just think, what is the initial momentum? What is the final momentum? the difference is the impulse.

Also, from what i remember, impulse is also the force exerted over a certain time (the force times the change in time). So for 3) you just have to solve for the change in time. It's good to remember to for a change in momentum, the mass remains constant and the speed is the only thing that changes.

Hope that helps, and check to make sure the equations I said were right.
 
How would you set up the problems though?
 
Initial & Final mass = 100kg
Initial Velocity = 25m/s
Final Velocity = 0m/s

Impulse is any change in momentum. Momentum = Mass x Velocity.
Once you have stopped the object from moving, there is no velocity. You can see that the momentum would be 0 kgm/s. The change in momentum of this operation is the impulse.

Impulse = MVfinal - MVinitial

For #2:
Remember that F*(delta)T = m*(delta)V
 
shredmaster1013 said:
I need help on these 2 questions.
1) What impulse if needed to stop a 100kg mass traveling at a velocity of -25m/s?
{IMPULSE} = {Change in Momentum} =
= {Final Momentum} - {Initial Momentum} =
= {(100 kg)*(0 m/sec)} - {(100 kg)*(-25 m/sec)} =
= (2500 N*sec)

and

3) A force with a magnitude of 430 N is used to stop an object with a mass of 45kg moving at a velocity of 900m/s. How long will it take to bring the object to a full stop?
{IMPULSE} = {Force}*{Time}
::: ⇒ {Time} = {IMPULSE}/{Force} =
= {Change in Momentum}/{Force} =
= {(45 kg)*(0 m/sec) - (45 kg)*(900 m/sec)}/(-430 N) =
= (94.19 sec)


-Any help on formulas and how to solve this would be appreciated.. Thanx!
Above utilizes {IMPULSE} = {Change in Momentum} = {Force}*{Time}.


~~
 
Thanxs.. did I set this one up right?
A Metal sphere with a mass of 40kg rolls along a frictionless surface at 40m/s and strikes a stationary sphere having a mass of 400kg. The firsts sphere stops completely. At what speed does the second sphere move away from the point of impact?
Va2=(-MbVb2/Ma) = (-400kg)(40m/s)/40kg
 
You should try to be more specific with your equation, but the highlights are, its a closed system, so momentum is conserved. Your initial momentum \rho_i = m v is equal to your final momentum \rho_f.

\rho_i = \rho_f.

m_i v_i = m_f v_f

Solving for v_f will give you your answer.

v_f = \frac {m_i v_i } { m_f }
 
Back
Top