Solving Physics Questions: Minimum Force and Friction Coefficient

  • Thread starter Thread starter physicshelpme
  • Start date Start date
  • Tags Tags
    Physics
AI Thread Summary
An artist must exert a minimum force of 75 N at a 45° angle to keep a picture in equilibrium against a wall, where the coefficient of friction is 0.30. To solve for the mass of the picture, the horizontal and vertical components of the force are calculated, yielding 53.03 N each. The frictional force is determined using the normal force, which is equivalent to the weight of the picture. By setting the sum of horizontal forces to zero, the mass is calculated as approximately 18.03 kg. This solution demonstrates the application of statics principles and Newton's laws in solving physics problems.
physicshelpme
!Physics Questions! Help!

An artist must push with a minimum force of 75 N at an angle of 45° to a picture to hold it in equilibrium. The coefficient of friction between the wall and the picture frame is 0.30.
What is the mass of the picture?
 
Physics news on Phys.org


Originally posted by physicshelpme
An artist must push with a minimum force of 75 N at an angle of 45° to a picture to hold it in equilibrium. The coefficient of friction between the wall and the picture frame is 0.30.
What is the mass of the picture?

Hi, and welcome to PF. Here in the Homework Help forum, I ask that you show how you started, and where you got stuck (see the thread "Read This Before Posting" at the top of the forum).

As with all problems in statics, you have to...

1. Draw the free body diagram.
2. Set up Newton's 2nd law for the problem.
3. Solve the equation(s).

Try that, post your work, and indicate where you got stuck. We'll help you through the rough spots.
 


To solve this physics question, we can use the equation for equilibrium: ΣF = 0, where ΣF is the sum of all forces acting on the picture. In this case, the only forces acting on the picture are the artist's push and friction from the wall.

First, we need to find the horizontal and vertical components of the artist's push. The horizontal component can be found using the cosine function: Fx = Fcosθ = 75 Ncos45° = 53.03 N. The vertical component can be found using the sine function: Fy = Fsinθ = 75 Nsin45° = 53.03 N.

Next, we can use the equation for friction: Ff = μN, where Ff is the force of friction, μ is the coefficient of friction, and N is the normal force. The normal force is equal to the weight of the picture, which we can find using the equation Fg = mg, where Fg is the weight, m is the mass, and g is the acceleration due to gravity (9.8 m/s²). So, N = mg = 9.8m. Substituting this into the equation for friction, we get Ff = 0.30(9.8m) = 2.94m.

Now, we can set up an equation for the horizontal forces in the x-direction: ΣFx = Fx - Ff = 53.03 N - 2.94m = 0. Since the picture is in equilibrium, the sum of the forces in the x-direction must be equal to 0. Solving for m, we get m = 53.03 N / 2.94 = 18.03 kg.

Therefore, the mass of the picture is approximately 18.03 kg.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top