Solving Tension in Wires at 50.0o & 45.0o

  • Thread starter Thread starter oceanflavored
  • Start date Start date
  • Tags Tags
    Wires
AI Thread Summary
The discussion focuses on calculating the tensions in two wires holding a 10.0-kg picture at angles of 50.0° and 45.0° from the vertical. The participant initially miscalculated the tension in the first wire, assuming all weight was supported by it, leading to an incorrect answer. It is clarified that the total weight must be distributed between both wires, and the vertical components of their tensions must equal the weight of the picture. The correct approach involves using the sum of the vertical components of both wires to solve for their individual tensions, resulting in 69.6 N for the first wire and 75.4 N for the second. Understanding the distribution of weight and resolving forces correctly is essential for accurate calculations.
oceanflavored
Messages
44
Reaction score
0
Tensions in Wires :)

Homework Statement


A 10.0-kg picture is held in place by two wires, one hanging at 50.0o to the left of the vertical and the other at 45.0o to the right of the vertical. What is the tension in the first wire? What is the tension in the second wire?

Homework Equations


Force = mass(acceleration)
Weight = mass(gravity)

The Attempt at a Solution


So, I drew my free body diagram, drawing the two forces and the weight pointing downwards in a vertical direction.
Then, I reasoned that since it was being "held in place," acceleration would be zero, meaning the net force would be zero.
so then, I tried to solve for the tension in wire that was hanging at 50.0o to the left of the vertical:
net force = T1 cos 50o - (10.0 kg)(9.81 m/s2) = 0
But that gave me an answer of 152.6 N, which definitely did NOT match the book's answer of 69.6 N.

I'm sorry I'm this confused; all the previous examples/problems I've done had the wires hanging at equal angles, so the tensions were always equal :/
Thus, I'd really appreciate if you could tell me where I'm going wrong! Thank you so so so so so so much :)
 
Physics news on Phys.org


You have two wires - the total weight is on both of them - you have assigned all 10kg to one wire and got an answer roughly twice as large as you should
 


So, are you telling me to divide my answer by 2?
Because, in that case, the answer for both wires would be the same??
Except, my book has different answers for each wire: 69.6 N for the first one, 75.4 N for the second.

I'm sorry; I'm still confused :/
 


The sum of the vertical components on the wires is 10g you can use this to find the absolute tension in each wire.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top