Spontaneous wavefronts in a flat flow

AI Thread Summary
The phenomenon of periodic wavefronts in thin sheets of water on asphalt is intriguing, as it suggests an interaction between the water and the surface texture. When the water layer becomes thin, it adheres to the rough surface, creating a sticking point. As water continues to flow, it accumulates behind this point until enough weight causes it to cascade forward, generating a pulse that reinforces the wave. This process leads to the formation of coherent waves despite the tendency of water to remain flat. The discussion highlights the balance between surface interaction and fluid dynamics in creating organized wave patterns.
gbell
Messages
7
Reaction score
0
Hi everyone,

I'm puzzled by this phenomenon - when there's a thin sheet of water flowing in the street, it forms little wavefronts which appear periodic. Obviously the water gets thin enough to interact with the rough asphalt surface, but how does the random texture manifest an organized, periodic wave?

Can someone explain this?
 

Attachments

  • IMG_6019.JPG
    IMG_6019.JPG
    70.2 KB · Views: 486
Physics news on Phys.org
The lower energy state for a plane of water is to be flat rather than rippled (unlike a line of water, for which forming droplets is energetically favourable) so it seems a reasonable question why it invariably forms coherent waves in nature.
 
Here's a theory...

The water spreads out so thinly that it stops flowing (sticks) to the surface. Like a drop of water on a mild slope that doesn't roll.

But the water is still flowing so it piles up behind the sticking point until it builds up enough weight to cascade over. This little pulse rushes forward and unsticks the next point down stream, reinforcing the wave.
 
Thread 'Gauss' law seems to imply instantaneous electric field propagation'
Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
Thread 'A scenario of non-uniform circular motion'
(All the needed diagrams are posted below) My friend came up with the following scenario. Imagine a fixed point and a perfectly rigid rod of a certain length extending radially outwards from this fixed point(it is attached to the fixed point). To the free end of the fixed rod, an object is present and it is capable of changing it's speed(by thruster say or any convenient method. And ignore any resistance). It starts with a certain speed but say it's speed continuously increases as it goes...
Maxwell’s equations imply the following wave equation for the electric field $$\nabla^2\mathbf{E}-\frac{1}{c^2}\frac{\partial^2\mathbf{E}}{\partial t^2} = \frac{1}{\varepsilon_0}\nabla\rho+\mu_0\frac{\partial\mathbf J}{\partial t}.\tag{1}$$ I wonder if eqn.##(1)## can be split into the following transverse part $$\nabla^2\mathbf{E}_T-\frac{1}{c^2}\frac{\partial^2\mathbf{E}_T}{\partial t^2} = \mu_0\frac{\partial\mathbf{J}_T}{\partial t}\tag{2}$$ and longitudinal part...
Back
Top