STATICS: Applying Force Equilibrium

AI Thread Summary
The discussion focuses on solving a statics problem involving a ball held by an inclined surface and a compressed spring. The key steps include analyzing the free body diagram (FBD) and applying the equilibrium condition that the sum of forces in both the x and y directions equals zero. The weight of the ball (W) primarily influences the y-direction, while the spring force and the normal force from the inclined surface affect the x-direction. Participants emphasize the importance of determining the angle of the normal force to apply trigonometric functions effectively. Ultimately, the original poster successfully resolved their confusion and solved the problem.
spragumn
Messages
2
Reaction score
0
The ball of weight W is held in place as shown in the left figure by the inclined surface and the compressed spring. The FBD of the ball is shown in the right figure.
Determine the force exerted by the spring on the ball, and the force exerted by the inclined surface on the ball in terms of the weight, W, of the ball.

How would this problem be solved?
I have the FBD, I'm just unsure of the first step!
 

Attachments

  • statics.gif
    statics.gif
    5.7 KB · Views: 916
Last edited:
Engineering news on Phys.org
The sum of the forces in x and y=0. So for example w is only affecting the sum in y, and s only in x. You would have to find the angle of the normal force and then you can express everything with cosines and sines. Give it a try, and if you don't have a clue just yet, post another message here with what you have done so far.
 
I was thinking about the problem wrong. Thank you for your guidance! I was able to figure it out.
 
Here's a video by “driving 4 answers” who seems to me to be well versed on the details of Internal Combustion engines. The video does cover something that's a bit shrouded in 'conspiracy theory', and he touches on that, but of course for phys.org, I'm only interested in the actual science involved. He analyzes the claim of achieving 100 mpg with a 427 cubic inch V8 1970 Ford Galaxy in 1977. Only the fuel supply system was modified. I was surprised that he feels the claim could have been...
Thread 'Turbocharging carbureted petrol 2 stroke engines'
Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
Back
Top