Stopping distance w human reaction time

AI Thread Summary
The discussion focuses on calculating the stopping distance of a car traveling at 26.9 m/s with a human reaction time of 0.9 seconds and a deceleration of -4 m/s². The total stopping distance is determined by first calculating the time taken to decelerate and then adding the distance covered during the reaction time. The deceleration time is found to be approximately 6.725 seconds, leading to a stopping distance of about 90.45 meters. Adding the distance covered during the reaction time of 24.21 meters results in a total stopping distance of approximately 114.66 meters. The conversation highlights the importance of correctly applying kinematic equations to solve the problem.
afa
Messages
8
Reaction score
0

Homework Statement



determine the stopping distance for a car with an intitial speed of 26.9 m/s and a human reaction time of 0.9s for an acceleration of -4m/s^2

Homework Equations



x=vt t=v/a x=x+vt+.5at^2

The Attempt at a Solution



I used the second equation to find total time by adding it to .9s then plugged that into equation 3 and added that to x of the first equation?? what am i doing wrong??
 
Physics news on Phys.org
Alright, you are going 26.9 m/s. When you stop, you take .9s before the deceleration takes place.

So, it's .9 seconds plus however much time the deceleration takes.

As such,
Alright, you are going 26.9 m/s. When you stop, you take .9s before the deceleration takes place.

So, it's .9 seconds plus however much time the deceleration takes.

As such,
(Original Velocity)/(Deceleration rate)=Total Deceleration Time
(26.9m/s)/(4m/s^2)=Total Deceleration Time
6.725 seconds= Total Deceleration Time

Stopping Distance=(Average Velocity)(Total Deceleration Time)
(.5)(26.9 m/s)(6.725 seconds)=90.45125 meters

Now, you know how much distance it takes to stop.
You have to add how much distance you covered before stopping.
(reaction time)(velocity during reaction time)=Distance traversed during reaction time
(.9 seconds)(26.9m/s)=24.21 meters

Add the two to get your answer.
24.21 meters + 90.45125 meters= 114.66125 meters

And that's your answer.
 
thank you so much, you seem to be the most helpful, do you think you could help me out on some more?
 
Certainly. How else would I postpone doing my chemistry work? And I haven't actually taken AP physics, so I suggest checking my answers that I give you. I just like math and am good at figuring stuff out.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top