Calculate Tension in 5m String Attached to 4kg Bob

AI Thread Summary
To calculate the tension in a 5 m string attached to a 4 kg bob moving in horizontal circles with a 0.6 m radius, the angle α is determined to be approximately 6.9 degrees. The correct equation for tension is T cos α = m*g, leading to T = m*g/cos α. After correcting calculations for cos 6.9 degrees, which is approximately 0.992757341, the tension is recalculated to be around 39.5 N. The initial calculation of tension at 326.6 N was incorrect due to misapplication of trigonometric functions. The final tension value confirms the need for precise angle calculations in physics problems.
John78
Messages
21
Reaction score
0

Homework Statement



Calculate the tension in a 5 m string attached to a 4 kg bob that is moving in horizontal circles of 0.6 m radius.


Homework Equations





The Attempt at a Solution



α= tan-1 0.6/5
= 7 degree

T cos α = m*g

T= m*g/cosα

T=4*9.8/0.12

T=326.6 N



I just want to check whether my working is correct or not.
 
Physics news on Phys.org
Your equations are almost correct, however, if the angle α is 7 degrees, then cos α = cos 7 = ? But your calc for that angle is not right. It is not the tan function per your attempt...
 
so am I right in my calculations

α= sin 0.6/5
= 7 degree = 0.121869343

T cos α = m*g

T= m*g/cosα

T=4*9.8/0.121869343

T=321.65N
 
John78 said:
so am I right in my calculations

α= sin^-1 0.6/5 = sin^-1 0.12
α = 6.9 degrees[/color]

T cos α = m*g

T= m*g/cosα
yes
T=4*9.8/0.121869343
No, the cosine of 6.9 degrees is not 0.121869343
 
cos 6.9 = 0.992757341

Am I right?
 
John78 said:
cos 6.9 = 0.992757341

Am I right?
yes, so T = ?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top