How Much Heat Does the Range Element Transfer in an Isovolumetric Process?

AI Thread Summary
In an isovolumetric process involving a pressure cooker with 2.0 kg of water, the internal energy increases by 8.0 x 10^3 J, while 2.0 x 10^3 J is lost to the surrounding air. The first law of thermodynamics indicates that since work is zero, the heat added to the system (Q) equals the change in internal energy (ΔU). Therefore, the total heat transferred from the range element to the pressure cooker includes both the energy that increases internal energy and the energy lost to the air, resulting in Q' = Q + 2.0 x 10^3 J. Understanding this relationship clarifies how to calculate the total heat transferred in the process.
interXdragon
Messages
13
Reaction score
0

Homework Statement



Q = ?
ΔU = + 8.0x10^3
W = perhaps 0 since isovolumetric?
Energy Lost = -2.0x10^3
Mass of Water = 2.0 kg


Homework Equations



I'm stuck on this thermal dynamics problem. It states: "A 2.0 kg quantity of water is held at constant volume in a puressure cooker and is heated by a range elment. The system's interal energy increases by 8.0 x 10^3 J. However, the pressure cooker is not well insulated, and 2.0 x 10^3 J of energy is transferred to the surrounding air. How much energy is trasferred from te range elment to the pressure cooker as heat?"


The Attempt at a Solution



I know that is is an isovolumetric problem, and in my book, that means work is equal to zero. Since 'w' is taken out of the equation, I solved it by Q = 8.0x10^3 J, from ΔU = Q - W. I then subtracted that by 2.0x10^3 J. My answer was completely off. What am I thinking wrong?
 
Physics news on Phys.org
Your on the right track. Consider the first law of thermodynamics, which are you correctly state is \Delta U = Q - W and as you correctly say, the process is isochoric \Rightarrow W = 0. So now we have \Delta U = Q where Q is the heat added to the system; this is the heat transferred to the pressure cooker which raised to internal energy. Now, if Q' is the heat transferred from the element is the pressure cooker and the surrounding air, then Q'=Q+2.0x103. Does that make sense?
 
thanks to that, now i have the right answer! but I'm still confused on the last sentence. i don't see why we should include 2.0 x 10^3 J into the transferred heat.
 
interXdragon said:
thanks to that, now i have the right answer! but I'm still confused on the last sentence. i don't see why we should include 2.0 x 10^3 J into the transferred heat.
Okay, you are given that the internal energy of the pressure cooker is increased by \Delta U, from the first law of thermodynamics you can calculate that Q joules of heat must be transferred to the pressure cooker from the element (in this case [isochoric] note that \Delta U = Q). Now, the element also supplies 2.0 x 10^3 J to the air so the total heat the element supplies is the sum of those two values.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top