Thermo reversible heat engines physics question

[mcewendavid]

I am having trouble with this question...It is from "applied thermodynamics for engineering technologists" by Eastop (Q5.2 if anyone has it)...

The Question:
Two reversible heat engines operate in series between a source at 527°C and a sink at 17°C. If the engines have equal efficiencies and the first rejects 400kJ to the second, calculate:
(i) the temp at which heat is supplied to the 2nd engine ALL DONE :-) =208.7°C
(ii) The heat taken from the source
(iii) The work done by each engine

I have done part (i) and I know it's right but I have no idea what equations to use for the next 2 parts because heat and work are dependant on each other so I don't understand how I can find one without the other...

Thankyou in advance
Dave :-)

 

[Jupiter6]

\eta_{rev}=1-\frac{T_L}{T_H}[/itex]<br /> <br /> \eta_{actual}=\frac{W}{Q_{in}}[/itex]&lt;br /&gt; &lt;br /&gt; Q_{in}=W+Q_{out}[/itex] (1st law)&amp;lt;br /&amp;gt; &amp;lt;br /&amp;gt; \eta_{rev}=1-\frac{T_L}{T_H}=.319=\eta_{actual}=\frac{W}{Q_{in}}[/itex]&amp;amp;lt;br /&amp;amp;gt; &amp;amp;lt;br /&amp;amp;gt; \frac{Q_{1_{in}}}{400}-.319=1[/itex]&amp;amp;amp;lt;br /&amp;amp;amp;gt; &amp;amp;amp;lt;br /&amp;amp;amp;gt; Using the above formulas, I ended up with the work for each engine at 127.6kJ. Total heat from the source 527.6kJ. However, I took the mid resovoir temp to be 272 deg C, the average of the high and low. Can you tell me how you got 208.7?

 

[Jupiter6]

\eta_{rev}=1-\frac{T_L}{T_H}[/itex]<br /> <br /> \eta_{actual}=\frac{W}{Q_{in}}[/itex]&lt;br /&gt; &lt;br /&gt; Q_{in}=W+Q_{out}[/itex] (1st law)&amp;lt;br /&amp;gt; &amp;lt;br /&amp;gt; \eta_{rev}=1-\frac{T_L}{T_H}=.319=\eta_{actual}=\frac{W}{Q_{in}}[/itex]&amp;amp;lt;br /&amp;amp;gt; &amp;amp;lt;br /&amp;amp;gt; Q_{in}=W+Q_{out}-----&amp;amp;amp;amp;gt;Q_{in}-W=400kJ ---&amp;amp;amp;amp;gt;1-.319=\frac{400}{Q_{in}}[/itex]&amp;amp;amp;lt;br /&amp;amp;amp;gt; &amp;amp;amp;lt;br /&amp;amp;amp;gt; I MESSED my first response up. Using the above formulas, I ended up with the work for each engine at 187.4kJ. Total heat from the source 587.4kJ. However, I took the mid resovoir temp to be 272 deg C, the average of the high and low. Can you tell me how you got 208.7?

 

[mcewendavid]

The answer in the book is 208.7 Deg C...but I got it using:-

\eta = 1-(T2/T1)

1 - (T2/T3) = 1 - (T3/T1)

1 - (800/T3) = 1 - (T3/290) - Figures converted to Kelvin

232000 = T3^{}2

T3 = 481.66K = 208.66 Deg C

 

[Jupiter6]

Ohh...derrr. My bad (I guess I've been paying more attention to the latex than the math). One more time.

\eta_{rev}=1-\frac{T_L}{T_H}=1-\frac{481.7K}{800K}=.398=\eta_{actual}=\frac{W}{Q_{in}}[/itex]<br /> <br /> Q_{in}=W+Q_{out}-----&amp;gt;Q_{in}-W=400kJ ---&amp;gt;1-.398=\frac{400kJ}{Q_{in}}[/itex]&lt;br /&gt; &lt;br /&gt; Q_{Total Input}=664.5kJ[/itex]&amp;lt;br /&amp;gt; &amp;lt;br /&amp;gt; W_{1}=664.5kJ-400kJ=264.5kJ[/itex]&amp;amp;lt;br /&amp;amp;gt; &amp;amp;lt;br /&amp;amp;gt; W_{2}=400kJ*.398=159.2kJ[/itex]

 

[mcewendavid]

omg you're a champion!

I totally didnt get the -W = 1 - 0.398 by using the T3 from part one
Now it just all fits together...it's great

Thankyou so much :-)