When and where do two transverse waves on strings overtake each other?

AI Thread Summary
Two strings, P and Q, with linear mass densities of 1.2 x 10^-2 kg/m are stretched under different tensions of 4.8 N and 7.5 N, resulting in wave velocities of 20 m/s and 25 m/s, respectively. Wave pulses are initiated at different times, with string P starting at t=0 and string Q at t=20 ms. The discussion clarifies that the speed of waves on the strings remains constant along their lengths due to the uniform tension applied, unlike a freely hanging rope where tension varies. Participants emphasize the importance of including units in calculations for clarity. The conversation concludes with a better understanding of the tension dynamics in this specific setup.
palkia
Messages
52
Reaction score
2

Homework Statement



Two long strings P and Q ,each having linear mass density 1.2 x 10^-2
are stretched by a different tension 4.8 N and 7.5 N respectively and are kept parallel to each other with their left ends at x=0.Wave pulses are produced on the strings at t=0 on string P and at t=20ms at string Q.When and where will the pulses on Q overtake at on P.

Homework Equations

The Attempt at a Solution



Using the wave equation for the string ,I found the velocity at x=0 for P and Q to be 20m/s and 25m/s respectively.But I have one doubt about this question.Shouldn't speed of a wave in a string change with respective positions due to change in tension throughout the string...So does this not contradict the question
 
Last edited by a moderator:
Physics news on Phys.org
What change in tension?
 
  • Like
Likes palkia
Change in tension in a rope having masses incrases linearly throughout the rope
 
You are thinking of a freely hanging rope. There is nothing in the problem formulation indicating that this is the case.

Also, you should always state units when giving values.
 
  • Like
Likes palkia
What is the difference between freely hanging rope and this case?

I will keep in mind to mention the units next time .
 
A hanging rope has a gravitational force acting on it in its longitudinal direction. For force equilibrium, this means tension has to vary accordingly.
 
  • Like
Likes palkia
And what does this case look like...are we holding the rope?
 
The strings are kept taut by pulling them at each end.
 
  • Like
Likes palkia
Okay.I got this then

Thanx
 
Back
Top