Two infinite sheets of different charge density

AI Thread Summary
The discussion focuses on calculating the electric field generated by two infinite sheets with charge densities σa and -σb using Gauss's law. It establishes that the electric field outside the plates is E = σ(a-b)/2ε0 n. Inside the plates, the superposition principle is applied to determine the electric field, leading to E = σ(a+b)/2ε0 n in the region between the plates. Confusion arises regarding the direction of the electric field for the individual sheets, but clarification is provided that the field is directed perpendicularly away from each sheet. Overall, the calculations and principles of superposition are essential for accurately determining the electric field in various regions around the charged plates.
purplegreen
Messages
4
Reaction score
0

Homework Statement


From the picture attached it can be seen that there are two plates with charge density σa and -σb. We will chose → as the n direction.
What is that electric field everywhere for this system?

Homework Equations


∫∫E.dS = ∫∫σ/ε0 dA

The Attempt at a Solution



Using Gauss' law we can take three gaussian surfaces. One containing both of the plates and two more containing each individual plate.

Using the surface containing both plates, we have:
ESn + ESn = σ(a-b)/ε0 n

hence,
E = σ(a-b)/2ε0 n outside of the plates

Inside I think I should use superposition of the two other surfaces. However I'm not sure which direction the electric field goes in for these two surfaces?

Generally I'm not convinced by my answer and lack some understanding which I would like some help with. Thanks in advance!
 

Attachments

  • Twoinfinitesheets.jpg
    Twoinfinitesheets.jpg
    23.9 KB · Views: 1,502
Last edited:
Physics news on Phys.org
Using Gauss's Lw, you should be able to show that an infinite charged sheet creates a homogeneous electric field directed perpendicularly to the sheet:
<br /> \vec{E} = \frac{\sigma}{2 \epsilon_0} \, \hat{n}<br />
where \hat{n} is a unit normal directed from the sheet outwards (on each side).

Now you can use the principle of superposition to find the electric field due to two sheets of charge.
 
Dickfore said:
Using Gauss's Lw, you should be able to show that an infinite charged sheet creates a homogeneous electric field directed perpendicularly to the sheet:
<br /> \vec{E} = \frac{\sigma}{2 \epsilon_0} \, \hat{n}<br />
where \hat{n} is a unit normal directed from the sheet outwards (on each side).

Now you can use the principle of superposition to find the electric field due to two sheets of charge.

Ok so would the answers for this question be:

on the left hand side of the 2 plates:
E= -σ(a-b)/2ε n

In the middle of the plates:
E= σ(a+b)/2ε n

Finally, on the right hand side of the plates:

E= σ(a-b)/2ε n

Thanks for the help.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top