Understanding Frequency in Pulse Tone Oscillators

AI Thread Summary
Pulse tone oscillators consist of a resistor and two capacitors, where the resistance and capacitance values directly affect the oscillator's frequency. The time constant, determined by the R/C values, influences the duration of the on/off pulse, which in turn dictates the overall frequency of the oscillator. Understanding the relationship between resistance, capacitance, and frequency is essential for analyzing waveform characteristics such as amplitude and wavelength. Practical experimentation, including building the circuit and plotting graphs, is recommended to visualize how frequency varies with changes in resistance and capacitance. This hands-on approach will enhance comprehension of the underlying principles of pulse tone oscillators.
manceraiders
Messages
3
Reaction score
0
can someone please give me some information about electronic oscillator circuits, in particular pulse tone oscillators (thats what it says it is) consisting of a resistor and two capacitors. how does the resistance/capac effect frequency? what does the time constant have to do with it? does the time constant have an effect on the freq? is there an equation to find the freq in a circuit like this? i need help...

heres a pic of the circuit
http://i.imgur.com/XodmHpA.jpg
 
Engineering news on Phys.org
hi there
welcome to PF

you cut out all the rest of the text ... there's probably some useful info in there for you
on the description of the osc.
show us more of the accompanying text or a www link to the article please :smile:

The time constant set by the R/C values determines the ratio of the on/off pulse length and that determines the overall freq of the oscillator

It looks kinda similar to a relaxation oscillator but with variations
Dave
 
hi thanks for the reply, i got this out of a manual and here is the text:
http://i.imgur.com/XvwyyEw.png

i am a complete beginner in this field and so could you explain what you mean by the on/off pulse length

thanks
 
in general the main focus is to understand the effect of changing resistance and capacitance on the freq, amplitude and wavelength of a waveform... i was just wondering about the background information and how this all works and what extra aspects are here
 
You are investigating this by building it and running some tests? Plot some graphs so you can show how f varies with R, and how f varies with C. Sketch all waveforms and monitor them to see how some change with change of componets.

This does sound like a homework or prac exercise.
 
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Thread 'How Does Jaguar's 1980s V12 Dual Coil Ignition System Enhance Spark Strength?'
I have come across a dual coil ignition system as used by Jaguar on their V12 in the 1980's. It uses two ignition coils with their primary windings wired in parallel. The primary coil has its secondary winding wired to the distributor and then to the spark plugs as is standard practice. However, the auxiliary coil has it secondary winding output sealed off. The purpose of the system was to provide a stronger spark to the plugs, always a difficult task with the very short dwell time of a...
Back
Top